Greetings. I'm new here. I have a 1967 Ford 3000, 42 HP Diesel. Yesterday I noticed that my box blade was low on the left side. I checked my owner's manual and it indicated that I could adjust the level using the leveling crank. In 5 years I have never used the crank although I have greased the fitting. I attempted to use the crank but it is stuck. I greased the fitting on the crank with no avail. I used a rubber mallet and I could only get the crank to move 1/4 turn. I didn't want to force it too much. I lightly tapped on the sides of the crank with a hammer and heated it a little with a propane torch. I used wrenches on the crank shaft to supply leverage and still no movement. Any suggestions?
Thanks,
Don
Thanks,
Don