LK35 Temp Gauge

farmer_dave

New member
Hi all,

I have a new Kioti LK35 an LK30 on steroids! The temp gauge never gets past 1/10th on the gauge. Have replaced the Temp sender unit but no change. The gauge goes full deflection when shorted out. the resistance on the sender unit is 370 ohms when cold (68F) and about 100 Ohms after a good warm up and stays there all day. The dealer thinks this may be normal but i dont as the gauge has normal and overtemp range for a reason. The sender unit shows 56 ohms in boiling water. Has anyone with LK35/30 seen this problem.

Rehards Dave
 
Top