Recent content by BBmong

Thank you for the information Again thanks for the help. I'm slowly bringing this tractor back from it's rough life.

Hello, I am still fairly new to the site and have gotten some good info from it already. Sorry to say, I am looking for more. I have the 3510 with 43x16.00x20 on the rear. What I need to find out is what size tire should be on the front to match that rear tire. Thank you for any info you can...

Thank you for the quick reply. The tires that are on thefront of the machine are off of a kubota, I am a new owner, I bought it with the 4wd broken and got lucky it was a 58 dollar part and I got it at great price. I just want the tire size to be within and inch of factory match so it dosnt...

Hello I have a 3510 with what I think is mis matched tires. I was wondering if any out the knows what the circumfrance is on the front tires that are paired up with rears that are the 43x16.00x20. The measurement I got around the front tire was 94 inches. The reason I need this info is to know...

Good morning 20/20 sounds like the shaft to the final drive is the weakest link in the system. I also heard on one of these forums that that shaft has twisted and snapped. It was mentioned that mahindra did this to keep the cost down if the was to be a breakage in the system it will be there...

final drive shaft shared Hello So I found the time to tear into the tractors front end and after about 4 hrs I found the shaft in the rt final drive to be shared at the spline. Thanks for the tips and help. its a 38 dollar part just have to wait for the delivery now.

Hello, I pulled the selector its not that its in the front end somewhere? I turn the d/s and the left tire turn but can be stopped with your hand, right tire does nothing any ideas. Im in the process of dropping the front end to get into the dif area first I hope its something easy.

Have you checked out the wheel shaft where the tire bolts to or the rim itself. Other than that it sounds like you checked everything else. Does the wheel wobble at all if spun. Good luck kepp us posted.

Hello again, I was wondering if anyone knows of a place that sells used mahindra parts I have had no luck finding this tractor salvage yard. Maybe they just don't quit working? I'm Looking for a grill a hub for rt wheel and a set of rims for a 3510 new sheetmetal mahindra . Thanks for the help'

Still new myself to the forum! Hello Jeep I was wondering if you could send me the plans I have a set of forks off of a Bobcat Im selling. Thanks

Thanks Cali! It makes alot of since Cali. I will do just that and try and isolate the issue I will let you all know in a couple of days I have other projects going at the same time. Thanks again for everyones input.

Thank you for your input, every little helps that is why I joined this forum.

Thank you Thanks for looking I think I will start by pulling the linkage off and seeing if there is anything going on behind the shift cover on the tranny then move fwd from there. again any help is appreciated.

Hello I picked up this early 2000 3510 tractor for short money 4K hr meter says 596 hours the body is pretty beat up and there is an electrical issue I am working through. Drive train works through all gears fwd and reverse How ever when I go to put the machine into 4wd I put everything into...