Hi, did you have trouble removing the port block in picture number 3. I can move it about half inch then it seams to be stuck on the shaft. Am i missing something or dose it come of with more force? Didn't want to force thing too much in case i missed something!
Thanks for all your help guys, I think you nailed it. I will have to leave this repair for now, we are busy on the farm for a few weeks or so. I will refer back no doubt for part numbers when i have a bucket of broken parts!! Thanks again for all your help.:tiphat:
Thanks for the feedback, The pieces are all similar thickness, almost look like teeth!
oil 100hrs ago and filters 50hrs I found the plastic when i removed the filters yesterday to check condition or if there was a problem with them. Genuine kubota filters and Kubota UDT oil.
Thanks
Hi all,
as above no drive at all. I had adjusted the coast valve (2 turns counter clockwise)and lost all drive. It did move slowly but sounded very notchy. I went back to base setting and it was the same!! After going back through the coast valve and re-adjusting 1 turn at a time (Clockwise)i...