Recent content by haffasst

I just happened to be looking at the Winco models. Their 15KW model needs 30 pto horses. My tractor only has 23 so I could only pull a 7KW.

Guys several months ago I was looking at the pto driven gens. I guit looking because I was warned that the output power is not clean enough for electronics. That includes computers, TVs, stereos, games, and maybe even a microwave. Be careful with what you buy and remember if your engine lopes...

2N restored and MF-20. 5' Bush Hog finish mower, 7' Atlas BB, some others

Tonny, I forgot to mention, if your tractor has an amp meter, take it out and buy a volt meter to replace it. The older machines actually measured the current leaving the generator going to the battery. These days they just measure the voltage at the battery. Hince all the new cars just have...

Tommy, if it has the original 6V starter, and it probably does. Don't overwork the starter. It will last many years on 12V but if you grind it to long it will overheat. Try to get some pic's of the wiring and we will try to walk you thru it. It's not hard and most of the original wiring can...

Also Tommy when you convert, normally you will use a 1 wire Delco alternator that has an internal regulator so you won't need the old mechanical regulator any more. (those things are a constant problem

Tommy, If you just want to get it running OK. If you want it for the long haul go ahead and convert it to 12V neg ground now and save yourself a lot of head aches in the future. It's not really hard and most shops have a conversion kit with a alternator and the brackets. You will just need to...

Mith, I have a 5' Bush hog brand finish mower. I have cut grass/weeds higher then that. I hold the mower about 6" off the ground for the 1st pass and then lower it for the second. I have changed the blades and I have gator blades on it. I know I have cut saplings 1 1/2". Only thing it wouldn't...

Forgot to attach pic's

Mine are: 1998 MF-20 1946 2N Bush Hog finish mower Atlas Box blade Agri fab- sweeper Husqvarna GTH 24X48 Sear walk behind Agri spreader Dirt scoop 18' trailer 14' trailer 4' cart misc others

Looks Great Jake. Nice work

Welcome Gaby. I'm just a little south of you. Louisiana. Glad you found us.:letitsnow:

McCathbad, 1st Welcome to the forum. I have attached a pic of my 7' Atlas BB attached to my 2N. The detail isn't the best, but the top link is connected to the center point (top) of the BB with one 5/8" pin and a cotter pin to keep it from falling out. Hope this helps.

That's alright I'll leave that to you "pro's". Mine just made a little noise and I wasn't home when my wife bent the crank. I'm glad you weren't hurt but I guess a change of pants was called for.:pat:

That's alright, I'll let that to you "pro's". Mine only made a little noise and I wasn't home when my wife bent the crank. Glad you weren't hurt, Just had to get some clean pants I bet.----LOL