Recent content by lens12

What is wrong with your engine. I have aYM226d coming in soon that needs engine work, but I have the parts to fix it.

I can supply you with a parts book.

I've bought tractor from 5 yards in Japan. I'm buying these tractors from the yard that I consider the best quality supplier in Japan. Their tractors rarely need any work & if they do it is very minor. I feel if you buy a good quality tractor, do normal service, & don't abuse it, you won't need...

We need a new post on this forum. I'm getting a container in next week with a couple interesting tractors to me. I've usually imported YM models. I'm getting a 2002 AF328D & a 1996 F60D with a loader & bale spike.

I would get the right starter. Before I got connected to a wholesale electrical supplier, I got a will fit replacement starer for my YM330 from a local automotive electrical rebuilder because it was cheaper than rebuilding. He is real sharp on this stuff, but he just followed what the literature...

The pump has a cam shaft below that activates the injector pump. By adding or removing shims the fuel timing is advanced or delayed.

I wouldn't worry about it. If you really want the 3 point to stay up, screw the knob in under the seat.

It would require everthing from the mounting bracket down. I can supply the parts either way you want to go.

The YM1300 tiller is about 42" wide

I haven't seen any red YM155s, but I think there may be some. See if it speeds up when the throttle is moved forward. If it doesn't, it is a mislabelled YM1300.

The Ym3220 has an electric fuel shut off. You could have a wiring problem(check for voltage at the plug(, Solenoid could be bad( probably what is wrong) , or linkage out of adjustment (I doubt this is the problem). We can supply a replacemant solenoid.

Thanks California for the recommendation. I do have used YM240d front end parts.

I can supply a ROPS. I also have a 2 point tiller made for the YM1300, which will work on the YM155

Mitsubishi & Kubota both made a US & Japanese model with a backwards pto & odd size shaft. The domestic tractor supporters try to give the impression that these nonstandard shafts were only on Japanese models while in reality domestic models also had them. The YM1300 tiller will work on the...

I don't have a parts book for the YM273. I do have one for the YM270, but I don't know how close they are. If it doesn't use the same filters as later tractors, they probably are not available from Yanmar.