Recent content by PWalker

If you dont mind me asking,what did you use for the windshield? I have got the clamps but curious how the plexiglass or Lexan forms to the ROPS.The curvature of the cage has me wondering if it will bend to form without breaking.Home Depot has a sheet 48"x48" of .222" plexiglass for $55.00...

Well we got it all mounted up today.We used some 4" angle and bolted that to the from plate by the receiver hitch,leaving a hole for the hitch.i plam to mount one of those tow hooks that go into the hitch.We then used 2" tubing to get out about 6" for hood clearance.That extends to the "K" on...

I got my loop clamps in today and will mount it up this weekend.Also went and bought about 20 ft of 2" sq tubing and 1" SQ tubing.We are gonna mount my winch up tomorrow and build a wrap around brush/grill guard with expanded metal in between.It was like christmas today,UPS dropped off my winch...

Tommy...If i remember correctly dont you make add ons for the RTV's???? I live north of Baton rouge and was just curious if you make a brush guard for the RTV 500?Wanted to do something other than the stock model.</p>

</p> I just ordered the SS rubber coated loop clamps from Mcmasters Carr.Pack of 10 was 7 bucks and change plus shipping.I may do what you did and go with the 1/8 Lexan so it can bend to match the cage.Where did you get yours Mike1234?HomeDepot had the .222 plexglass for 55 a sheet,36x48.</p>

I pulled mine the other day as well.11/16 socket I think and tap the back side of the whell and she pops right off.Its a splined connection.I greased it,some grease already there,and sprayed lithium grease every where else steering related.It was still making the noise after I did this .I got on...

At low spped I have a noise,a rubbing type sound,comiing from my steering.Its only when I am making slow speed turns or direction changes.I have taken the steering wheel off and applied grease as well as WD 40 the entire shaft and joint.Has anybody else noticed this?If so how did you correct...

has anybody made a windshield out of Lexan or plexiglass?I am looking to add a windshield but dont want to spend the 300.00 to do it.Just curious about how the lexan handled the bend of the front frame.</p>

I found the problem.The radiator fan had come unplugged underneath .I assume a stick got it and pulled it loose.Before I found it I could hear a fan running but it was the one under the drivers side.The radiator fan is so thin you cant see it unless you are looking for it.fan is running and all...

I have a new RTV 500 that I bought 2 weeks ago.It currently has 4.8 hours on it.Yesterday we were riding and my wife noticed the temp gauge going up.We had gone through a mud hole but pulled through with no problems.We stopped and I checked the screen that protects the radiator and it was...

Thats very good to hear.Did you have any problem with wiring?Where did you mount the contactor??? Just curious.I have never installed a winch before but my buddy said the instructions were pretty straight forward.</p>

I talked to the folks at MotoAlliance today (Viper Winches very nice folks) and they stated that the viper has the same mounting holes as the Warn Winches.I hope that I can just bolt it to the plate out front and go from there.The rep at Viper said the holes are 3" front to back and 4 7/8" side...

Thanks for the warm welcome.I didn't really look at the area under the hood latch for winch mounting holes.I just figured it needed a mounting bracket.I dont have it right now to look as its in Mississippi where I hunt and I am here in La. A friend of mine built a top for his Ranger out of...

I am new to the site but have been lurking for awhile.After countless hours of research and shopping between the Ranger,Mule 610, and RTV 500 I finaly decided.I puchased a new RTV 500 Camo on Saturday.Now I am in the process of buying all the add on goodies.I have a toppicked out and a buddy of...