Recent content by rwf642

Hey Ya'll The fuel system problem is solved/repaired. I just received my pump and injectors back from Mylex Int. in Mendenhall, MS. They rebuilt the pump and set the correct pressure in the injectors for a total of about $600. Installed it all tonight and it fired right up! I'm sure the...

:thankyou2:Spud Hauler Thank You! The exploded view of the injector nozzle is perfect but nothing like that for the injector pump. m I worked several hours on Weds only to decide that it was the pump and I would have to step up to the plate if I want to use it anytime soon. I am sending the...

Does anyone know where to get an exploded view of the parts of the individual injection pumps. Or has anyone taken them apart. I will post a picture later of what I'm working with.

I removed the valve cover and valves are operating like should, put pressure gauge on mech fuel pump and it read zero. I removed fuel pump cleaned rubber diaphram, housing etc, reassemble tested with gauge still zero but pumping fuel adequately. When I put finger over outlet (in fuel) it stops...

Realtree/BC- Sucking air could be an option. I'm not sure where, but leaning on those hose while working/inspecting could have cracked a hose somewhere. I will put new fuel lines on where I can and try to eliminate those possibilities. Thanks again for all your help, its nice to know there are...

Bordercollie- Thanks for the pages scanned there is some useful info there. If I work on this much more I may have to get one of these manuals. Looks like your is in CD!

Thank You all for your help to resolve this no start issue. I am going to start all over with the inspection process. I did not put a fuel pressure gauge on the mechanical pump. There is definately fuel being pumped by the mech pump but is it enough pressure? I will check that with a gauge. I...

I have checked the fuses out of habit but what would be electrical besides the shut off solenoid that might keep it from developing fuel pressure? Also thanks for your offer of pics from the manual. I do not have a shop manual on this unit. Any info you can share would be appreciated. I don't...

Glow Plugs I pulled the glow plugs and put 12v from the battery and they get red hot. Re-installed them and applied 12v directly again and no start. I didn't mean to ignore your post on the last response but I just got carried away a little answering the valve adjustment reply.

Thank You for your input, I have not checked valve clearance. The valve covers have never been off. It happened suddenly. I parked it and next it wouldn't start. It started running a little under powered and had to feather a little on the last couple starts. I did not remove the fitting for...

Thanks for your response, the stop solenoid is working properly and I did check it. I read in another post that adjusting the idle speed was done with a lower screw near the fan blade. That screw would not be part of the injection pump but maybe there is a clog somewhere in that vein. I...

I have read all the forums and have not been able to solve my problem. Rtv will not start. No smoke! It turns over great.I have replaced the injector nozzles because we got some water in the fuel which caused the injector nozzles to freeze up (on a previous repair). I have a racor inline filter...