Recent content by williemakit

Sorry for the delay reply to your posts aurthuritis and hondajoe but have been under the weather with the flu bug. You are right aurthuritis i have an X1100 model and forgot to state that. Hadn't thought of the cap being a possible problem area, good call. Will take the cap to my motorcoach...

I have a radiator problem on my 1100 and I'm hoping someone can help me out. First let me say that I'm not to familar with the two radiator system. When the coolant system is full the temp gauge reads two bars steady. Today while plowing snow I noticed the gauge fluxing to three bars. I wanted...

Anyone wishing to view a light bar install from start to finish on an 1100 ck out Paul Short's light bar video on youtube. One of the better ones I've seen. I'm sure anyone who owns a kubota product has heard of Paul and knows his work.

I have a Western Impact V-plow on my 1100. I checked into the boss plow and found that it was 50 lbs heavier then the western and a lot more $$$. this is my second season with the western and have no complaints. I sit 400' off the road with a circle driveway with parking spaces and a motorcoach...

Have you checked the temp control knob to make sure it is opening the supply valve to the heater fully. I can't say I have a heat problem, I have to turn mine down when plowing snow, it just about drives me out.

bczoom that's a good question I will have to find the answer to. I bought mine June of 2015 with 205 hrs on it from a JD dealer in Pa. and he didn't seem to know to much about them. Thanks for the info.

Just wanted to pass some information on to anyone who may be in need. I have a 2013 x1100c. In 2016 I had a western Impact v plow installed. western says H/D springs are not required but recommended. After the plow season was over I still felt I didn't need the springs but heavier duty is...

I have a 2013 x1100c with a western Impact v plow. I had the plow installed fall of 2016. I only run one battery and can't understand why the dealer would say you need two. I have had no problems. I went with the western because it was 50 lbs lighter then the boss. I felt 50 lbs was a lot of...

Nice work cowrider. Looks like a factory job.

could it be any type of belt slippage, that always seems to make a chirping sound

Congrats on your new ride, looks sharp.

Yes, I have found the same to be true when shifting, a slight burp gf the gas pedal makes shifting much easier.

The radio in my 1100 came from the factory and is mounted in the headliner. It's a Jensen heavy duty model AM/FM/CD/BLUETOOTH. The speakers are in the headliner also. Kubota put in a great radio but it's all lost on the cheap speakers. Sounds like somebody yellin through an m-ty soup can. I plan...

I have seen one for a pickup that mounted into a hitch receiver that was homemade. He took a piece of flat plate. drilled holes in it to mount the winch, welded the plate to male end of the receiver hitch, installed it into the hitch like a ball mount, then ran a power cable to the battery with...

Has anyone ever tried to install a remote start on a x1100c? I'm sure it would work, I just can't figure the delay for the glow plug.