Search results

No. Seems Kubota is getting my money

Well I called and the Kubota dealer wants a little better than $60 for this filter. That's nuts. I'd guess if I could bet a good manufacturers part number it would be a lot cheaper at an automotive store.

If it's the right one I found it on ebay for $27.99 shipped. I can't find a part number that matches but it looks like the right one. The one that came out is two pieces side by side that slide together.

I finally took the time today to check into this further. I think I found the cab air filter. On passenger side with a cover that snaps off? I pulled it out and it was full of nest materials. It had a small hole in it. I got most of the material out and will take a vacuum out and be sure. I have...

Guess I'm a bit thick as well. Mine is also the "X1100C". Also a 2014 model

Which knob

Mine is the 1100c as well. Where to I start?

I noticed today when I turned the fan on in my 1100c that I had a smell. I'm thinking possibly mice got in the duct work. Has anyone had that issue? How are to get into it to clean it? Any advice or input would be appreciated.

I had damaged the driver side door and had it replaced under the insurance. The new door was damaged as well when they put it on. They had returned the machine and said they didn't see the dents. While waiting for the new door to come I had slid on some ice in March and damaged the passenger...

School me on Fluid Film Do you put it on the entire chassis of the RTV? What about on the body? Does it have to dry or sit for a bit before using the machine? Anything else?

6 ply will not work on the 1100c. Not enough tire for the weight. Look here: allterrainonline.com I put the STI Rocktane XD's on mine

Tailrotor I put the same set up on mine in November. I noticed the other day the lug nuts are all rusting. Are you having that problem?

The dealer mounted my control connection just to the right of my steering column. You are right about it being better on the left. I have used it this year with my left hand. Kind of lay it across my lap and it has worked. May look at moving it to the other side after this weather breaks.

They were about 7 hours. They had quoted a flat rate and told me it could be up to 8 hours. Something about dropping the front bumper assembly and getting it back together with the mount took a bit of time. I am sure wiring took time too. They did a real nice job as far as I can see.

I paid the dealer $300 and didn't have to think about it.

The first guy I talked to told me this was the first time he had heard of this. When I stopped to pick it up a was talking to one of the mechanics. I asked if he had seen it before. "Yes, we even had to replace the one on our machine". Sounds like it may be a common problem talking to him...

Just talked to dealer. It is as I suspected, oil is going around the seal and when I raise the blade it pushes out the breather. They are going to give me a new cylinder

It's not likely it was overfull. I had used it several hours. Just started leaking today. I seems it is coming through the breather. I check it in the morning and be sure it's not loose. Thanks

Mine is new as well. I had it installed in the fall. It has 10-12 hours on it now but seems awful quick for seals/packing to go

My v-xt plow has a leak. It appears to be on a breather at the top of the cylinder that lifts the plow. When I raise the plow it pushes oil out of what I assume is a breather. Looks like there is only one line on the cylinder at the bottom. It appears that the weight of the plow is what drops...