Search results

Wow, that sucks big time.:pat:So far I have not expierinced any thing like that with mine. I have been away working inShanghai for the last 3 months, so have not had much seat time. The tractor is asleep in the shed

Up date, after haggling with the supplier, they are sending me a rubber boot. During the conversation they informed me that the tractor had not been registered, something the dealer insisted that it was and oh by the way the 5 year warranty that their claiming is only for the tractor not the...

I have a TYM300 that has a rubber boot over the bucket lift control handle/valve block that is rotting and cracked after 1 yerar. Anyone have the problem?

I have a TYM300 with a TYM330 loader. The 3pt lever is very stiff, can these be adjusted to not have so much tension?:cuss:

Well while bush hogging last night with my 300 I got a tree limb jammed up into the engine alongside of the radiator knocking off a small water line and pushing the plastic fan shroud into the fan. The fan made a hello off a racket and I shut her down to see what happened. Upon looking I see...

Beet juice Sure, I had the dealer come and pick the tractor up as it was due for it's 50 hour service and he filled them while he had it there.He sells the beet juice. The guy is great, no charge for pick up and delivery.

TYM opinion I bought a TYM 300 GST with a 330 loader last spring and have been very pleased so far. I had the rear tires filled with Beet juice which made the tractor much more stable. I had an issue with the fuel gage and was replaced, have a recurring issue with the tach. The dealer will...

Has anyone have or had issues with your tack. not functioning properly. I have a 300 that either stops at 6 when shut off or does not go above 6. Then it mysteriously work OK. I called the dealer and he said he would order a new one, but last night it started working again.

I talked again with dealer, he said he has ben very busy, but has some lights that can be connected to spare plugs already on the back of the tractor that will turn off and on with the head light switch. Dam near drove into my ditch while transporting two trash dumpters in my FEL after dark down...

Well I called the dealer and he did indicate that he had one similer instance when the grease got cold and it effected the magnet some how. He said to keep and eye on it to see if it happens again.

I have a new TYM300 and today when I sterted her up the RPM meter did not move at idle and only came up to 1000 when wide open. I let it idle for a while to warm up and then shut her down, restarted her again and the meter worked ok. Is this a prelude to failure you think?

OK, just revisited the Payne fork web site. Mine are the light duty 1200 lb. capacity for 300. plus 25.00 shipping. I got the light duty because I don't care to lift more weight than that fearing it would damage the bucket.

Not sure on the model. I've had them about a year. The cost was around $325.00. The first set slipped down over the uprights and was made of light channel. The second set was more robust and were solid tubing between the locking collars and slipped over the forks. The first set I bent while...

No they came with mine. The first pair were kind of flimsy and they replaced them with a more robust set at no charge.

payne forks I have a pair of Payne forks, I notice you don't have the tie bar on yours, did you not receive them. They keep the forks from moving side to side and keep them parallel.

Anyone added running or work lights to their tractor. On my TYM300, with the bucket raised or carring anything in the bucket, I cannot see at night because the lights are blocked.:shit: I have asked the dealer to come up with something to add on, perhaps to the ROP.

Well just had my 50 hour service done on my TYM 300, all went well. I had them fill the back tires with Rim Guard, it took 25 gallons per tire, what a difference in loader work. I was moving wet number one round stone into some kennel runs last night and I could not raise the back end with the...

Yes I usually keep either the BB or BH or some other implement on the back, but when I have the fork extension on and a load on them it gets reall bouncing and if I'm not lifting on center it will raise one back corner up and you get the pucker factor like your going over. As long as you don't...

Good choice I have the 330. I have found that they are a little light in the rear with a loaded bucket. I'm having the tires loaded next week with Rim Guard. I have had a couple of pucker moments when using the fork extensions as well as moving pee stone. The hyd. are a little touchy and you...

fuel usage Yes your correct, I have been bush hogging the last couple of evenings at pto speed and the fuel gage drops pretty quickly compared to normal putsing around doing other stuff. I have been having trouble with my fuel gage. Half full is really full and empty on the guage is around half...