Search results

Because it does not swing to the side, I think it will be more useful for holes rather than trenches.

And here I thought I was being original! I just searched "Fronthoe" and found lots of examples. Now that I have hydraulics out to the FEL, I can use other skid steer attachments or ideas. Doug

Both the FEL joystick and the HYD outlets controls are on my right, so it is a little awkward to run. More practice will help. I just put it together, and have not done much with it yet.

I had most of what I needed laying around, and I am having an ever increasing hard time hand digging in my clay/chert soil, so I built what I call a front hoe. If you are interested here's some fotos of my newly built, low cost digging tool. Doug http://www.flickr.com/photos/sundug/7625541628/

I located the timer relay for the intake heater, it's just below the long tube of the intake, mounted on the upper brace. It was getting voltage, but not making the high amperage connection to the heater. Since I figured I had nothing to lose, I took it apart, blew it out with air, sprayed...

Thanks, a block heater is not really an option as there is no electricity where the tractor is stored. I'm considering putting a remote starter solenoid like on the older Fords on it controlled by a momentary push button switch.

Unfortunately, the heavy wire coming from the heater disappears into the wiring harness and I do not see it reappear anywhere. It seems to me it has to go to a larger solenoid or relay than the one I found. The small relay I found is about the size of a turn signal flasher and only has light...

Yes

Thanks for the reply, but I checked for voltage at the heater, and there was none. The fuse was replaced and has not blown again-yet.

I tried it again on a cold morning, and it still didn't send any voltage to the heater

I have a 2007 6500 4WD. I bought it a year ago with 325 hours on it. I used to see the manifold heater light come on when I first turned on the key, now it does not, and when temps are in the 20's, it has to crank a lot to start. I found the manifold heater and light on the wiring diagram, and I...

I finally figured out what was going on. I had to wire one of the valve handles back, and it also helps when plugged into the right outlets

Both good points, thanks. Lutts, TN and asking $6500 I've seeing the same model asking $8000

1973 IH diesel tractor for sale, 45 PTO HP, PS and PB, Loader with narrow bucket with hay forks and removable gravel pan, two new bucket cylinders, canopy with fan for operator, hydraulic outlets, three point hitch, shop and operators manuals, recently replaced tie rod, alternator, front tires...

I have a 2007 Mahindra 6500 4WD with FEL. It has 4 hydraulic connectors in the rear. I am trying to make my log splitter work on it, it is a homemade vertical hydraulic splitter with a regular hydraulic log splitter valve. It has been working fine on my 1973 IH 464. However, when I plug it into...