Search results

Will do if this old geezer can remember the camera. I ran it at about 1100 to 1200 rpm today bush hogging ( Low range 3rd gear ) and it still leaked around 2 quarts of oil in 5 hours. The power band on my brothers MF135 is around 1700 rpm and I've put tons of hours on it over the last 20 years (...

Dav, all the way forward on the PTO leaver is ground speed PTO ( unless you have a muiltpower ) which means it will only rotate while the tractor is moving. All the way back is straight drive PTO which works off the back of the Hyd. pump. These are square cut splines on the Hyd. pump shaft and...

Splitting the tractor in half is a piece of cake now that I've done it about 4 times now. I told my brother I've done so many times that I believe I could do it before my coffee got cold. ( Rtic 30 oz ) As soon as I get done bush hogging and food plotting I'll bust it apart again. If I find...

I'm new here, this my first post too. I need a little help solving an oil leak coming out of the bell housing through the drain hole. It's pretty bad it will leak 2 quarts in about 4 hours of bush hogging. I have already replaced the rear main seal it's the rope one. I put a new gasket on the...