New toy!!!!

johnny quest

New member
Mitsubishi mt372. 15 hp 2 cyl diesel. It came with a finish mower also.
Now I need a box blade and tiller. Cute little thang. :17875:
 

Attachments

  • F03338DD-61C1-4305-B8F4-F6CFD644DFD6.jpg
    F03338DD-61C1-4305-B8F4-F6CFD644DFD6.jpg
    56.1 KB · Views: 30
  • A3C2E633-857E-4988-B75B-9A670C0685C0.jpg
    A3C2E633-857E-4988-B75B-9A670C0685C0.jpg
    47.9 KB · Views: 29

bczoom

Senior Member
Staff member
Gold Site Supporter
Congrats on your new tractor. Those little tractors will surprise you on what they can do.
For the box blade, they're pretty heavy so I'd go with something just a tad bit wider than your rear tires.
 

California

Super Moderator
Staff member
Site Supporter
You'll love it. I run a little Yanmar about the same size and 18 hp. (Photo)

I now use the 18 hp for everything in place of the 24 hp Yanmar, which is now dedicated to just backhoe use.

That's the perfect size, if you need to maneuver around tight space.
 

Doc

Admin
Staff member
Gold Site Supporter
Nice. Congrats.
I had one just like that or close. It was a 17hp. Came with a belly finish mower and a little 4' brush hog. Awesome set up. Belly mower was hard on belts and that was the only issue I ever had with it.
 

johnny quest

New member
Ok. It needs new blades on the mower and they’re assbackwards. Pulleys turn counterclockwise. Everything I’ve seen is the opposite. If I turn them over the lift blows down. The blades are 16 3/4” each. Can’t find counterclockwise ones. Any suggestions.
 

bczoom

Senior Member
Staff member
Gold Site Supporter
Do the existing blades work or are they spinning the wrong direction?


Do you have a diagram for the belt(s) across the pulleys? Wondering if the belt isn't on correctly
 

johnny quest

New member
The existing blades are counterclockwise blades. And they work correctly but are worn down to nubs. I found a pic of the correct kind of blades. Just need to find some. Here.
 

Attachments

  • 3E0C92DA-8EC0-4CD6-AC5C-0BA5B81099A5.jpg
    3E0C92DA-8EC0-4CD6-AC5C-0BA5B81099A5.jpg
    36.7 KB · Views: 21

bczoom

Senior Member
Staff member
Gold Site Supporter
What's the name brand (and if you have it, the model) of the mower?
 

bczoom

Senior Member
Staff member
Gold Site Supporter
Sweet!

Out of curiosity and for forum knowledge, where did you buy them?
 

johnny quest

New member
I scored a 3.5’. Cat 1 box blade for her. $175.00 on Craigslist. (Cha ching) I hooked it up and did some testing with it and the matchup was perfect. It’s a little rusted and has a ding or 2 but it’s an implement. The specs on this 372 say cat 0-1 so either will work on it. Found a 3 point hitch cat 0. Also. Now I can move trailers and things that require a ball hitch. Rock rake is next. Things are moving along great.
 

Attachments

  • 982BD5A2-7756-4AEC-A400-06A50228C112.jpeg
    982BD5A2-7756-4AEC-A400-06A50228C112.jpeg
    188.8 KB · Views: 10
  • 60B17925-CBEA-41A9-9650-F71222CF58C7.jpeg
    60B17925-CBEA-41A9-9650-F71222CF58C7.jpeg
    137.7 KB · Views: 10

johnny quest

New member
Also the whole rig, mower and all fits on my 5x10 utility trailer. Can’t get any better. It has 4 acres of pasture to do. The rest is totally wooded.
 

Attachments

  • ED1E00C6-E752-43C7-9201-F14744D41D72.jpeg
    ED1E00C6-E752-43C7-9201-F14744D41D72.jpeg
    136.6 KB · Views: 11
Top