2006 RTV 900 rear differential

Celtic

New member
Does anyone know what it cost to replace or rebuild the rear differential in a 2006 Rtv 900. Machine only moves in four-wheel-drive.
Thanks for any info
Paul
 

whatscookin

Member
Gold Site Supporter
You should first check that the rear hubs haven't stripped out the splines that hold the hub to the axel shafts secure. On my 900 I found the large nuts were loose allowing looseness to grind away at those splines, everyone should check this. I have been wrong before.
 

Celtic

New member
Thanks cookin i did tighten axel nut it was loose and there was a bunch of dust in the dust cap not sure how to determine how much damage has been done and if anyone has had to replace the whole thing and what it costs.
 

whatscookin

Member
Gold Site Supporter
I forget the torque I used but crank down on the nut on both sides real good and see if it will pull now and or have someone watch the nut when you try to get the machine to move.
 
Top