Net Tractor Talk
       

Go Back   Net Tractor Talk > Brand Specific Forums > Yanmar Forum

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-23-2019, 11:23 AM
PDXdrummer PDXdrummer is offline
Junior Member
 
Join Date: Apr 2019
Location: Oregon
Posts: 5
Thanks: 4
Thanked 0 Times in 0 Posts
PDXdrummer is on a distinguished road
Default YM-240 Transmission/Hydraulic Fluid Recommendation?

Curious to know what trans fluid is recommended and where the most economical place to get it might be? The manual calls for 4 gallons of John Deere 303 or "Hy-Grad" which seems to be a typo in the manual? I'm seeing "Hy-Gard" all over the internet but I read an article about the dangers of 303?:

https://www.tractorlife.com/2018/06/...raulic-fluids/

I don't want to go so cheap as to cause any problems with components but don't feel I need top-of-the line stuff either. Are there other brands that meet specs you guys might recommend?

Thanks in advance!
Reply With Quote
  #2  
Old 05-23-2019, 12:16 PM
California's Avatar
California California is offline
Super Moderator

 
Join Date: Apr 2007
Location: Sonoma County (Wine country N of San Francisco)
Posts: 1,468
Thanks: 119
Thanked 299 Times in 175 Posts
California will become famous soon enough
Style: VB_Blue
Default

I run the '303' UTF from Tractor Supply or Autozone in my YM240, I figure it is as good as what Yanmar expected 40 years ago. It's single weight (viscosity) which is likely why the manual says 5 minute warmup before running - and in cold weather that is realistic advice. My use doesn't run the tractor long and hard at maximum output, if I did I might step up to better UTF. But I've never heard of a problem using this in a simple gear transmission.

On the other hand I buy Tractor Supply's premium UTF (Hy-Gard equivalent) for my other tractor which has Powershift, a transmission nearly identical to an automotive A/T but no torque converter at the input. Just a direct mechanical driveshaft going back from the clutch. That one relies on its internal clutch packs to get the tractor moving and complex hydraulic valves to control the shifts. It feels sensitive to oil viscosity. It likely benefits from fluid rated for minimal brake grabbing, wet clutch chatter etc and other characteristics of oil formulated for modern applications including hydrostatic transmissions.

Those two are the cheapest UTF's available. I think they're adequate for what Yanmar expected 40 years ago. For a YM240: 303 if your climate is moderate, Hy-Gard J20D equivalent if you plow snow etc. Maybe more expensive oils if you think the tractor will still be in service after another 40 years.
__________________
Reply With Quote
The Following User Says Thank You to California For This Useful Post:
PDXdrummer (05-23-2019)
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





All times are GMT -5. The time now is 11:03 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2002 - 2019, www.DotHQ.com