Old German
Member
I'm trying to attach a picture but having a bit of problem ( picture is of plug and the metals attached (I didn't know it at the time but my helpers kept the plug with everything still attached to show me....Yes i bought 3 filters. 2 for Hydraulic and Tranny and 1 motor oil. Installed the new inner joints and fasten back to transmission using the sealant provided by Kobota. I didn't do any flushing yet because the sealant needed to set for 24 hours before any oil should be used.
1) Complete the assembly of rear axle, hopefully today.
2) Flush the tranny several times using hydraulic/tranny oil ( i will leave the old filters in for this) unless I'm not having any success with circulation. After circulation and flushing is complete I will open the old filters and see what is present.
3) If things are working in my favor at this time I will add the new filter and oil and ride it for couple days and possibly change the oil again.
Now that I have the inner axle attached to tranny I have to say I can't turn it my hand?? it's too hard......I'll let you know how this turns out....work continues
Kurt
1) Complete the assembly of rear axle, hopefully today.
2) Flush the tranny several times using hydraulic/tranny oil ( i will leave the old filters in for this) unless I'm not having any success with circulation. After circulation and flushing is complete I will open the old filters and see what is present.
3) If things are working in my favor at this time I will add the new filter and oil and ride it for couple days and possibly change the oil again.
Now that I have the inner axle attached to tranny I have to say I can't turn it my hand?? it's too hard......I'll let you know how this turns out....work continues
Kurt