Net Tractor Talk
       

Go Back   Net Tractor Talk > Brand Specific Forums > Ford / New Holland Forum

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-03-2019, 11:02 AM
RancherGuy RancherGuy is offline
Junior Member
 
Join Date: Feb 2010
Posts: 9
Thanks: 0
Thanked 2 Times in 2 Posts
RancherGuy is on a distinguished road
Default Ford NAA Power Steering

Hi. I have searched for an answer, but come up with zero. I hope to get some help.

My dad has a 1954 Ford NAA. It has a loader and power steering, even though I understand that NAA did not come with PS. I think I have identified the loader as a Davis, and in the Colo Springs area I have seen craigslist entries of other tractors that look identical - w/ Davis loader, a hyd pump hanging out the front grill, hydraulic cylinders on the steering links.

Here's the analysis. His steering column locked up. We took the steering box out and apart and it looks like that box has not had grease or oil for decades. Shaft bearings are fried, "roller ball" assembly for the shaft's toothed block was frozen. The whole steering shaft assembly with bearings and races inside the box needs replacement. The gears look good. Box looks good.

Here's the configuration. His steering column appears to be made up of 2 or 3 shafts: a 9-10" shaft assembly inside the box with a coupler at it's top end. That mates to a shaft that goes into a hydraulic valving unit that has 4 hydraulic hoses. That valving unit is anchored to the steering box with 2 long bolts. Then there is a shaft above the valving unit that the steering wheel is connected to. Because it is in another state, I cannot confirm at this point if the assembly above the steering box is composed of 1 or 2 shaft pieces, but that's not a concern.

Here's the problem. In all of my research, including dealers and online, I cannot determine what the steering box is, and I definitely cannot find a steering box 'shaft assembly' that is only 9-10 inches long. It appears to match a S.67078, but that looks like a one piece long shaft.

If I know I have a shaft assembly that fits, I am willing to cut the shaft and fasten the shaft coupling I have to the end, if that's what I must do.

Help! I need information to know what to do!
Reply With Quote
  #2  
Old 10-10-2019, 10:11 AM
RancherGuy RancherGuy is offline
Junior Member
 
Join Date: Feb 2010
Posts: 9
Thanks: 0
Thanked 2 Times in 2 Posts
RancherGuy is on a distinguished road
Default

Here are some pictures to visualize the short shaft.
Attached Images
File Type: jpg IMG_6779.jpg (50.3 KB, 4 views)
File Type: jpg IMG_6781.jpg (55.2 KB, 4 views)
File Type: jpg IMG_6782.jpg (53.8 KB, 4 views)
File Type: jpg IMG_6783.jpg (61.6 KB, 4 views)
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





All times are GMT -5. The time now is 07:01 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright 2002 - 2019, www.DotHQ.com