cadetwillys
New member
Hello Gang...I have a hyd problem with my 2040.While running my bush hog I hit a stump and sheered a pin.I raised the hog and went to the house and lowered the hog..replaced the pin but when I tryed the lift it would not raise and the power steering was also not working.I have replaced filter,cleaned screen,removed all check valves on the outside of the tractor per the maint. manual.All look good with no metal or damage.The hyd fluid looked a little milky but was clean.Have not run a pressure or flow check...Thats next....No unusual noise anywhere.Questions are ...where to look next...how do you get to the trans. pump...Where would you look 1st for a cracked or broken line inside the tractor.......Thanks.........PS....This is a OPEN system........Got to know that on this model tractor........Thanks again.......Barry.......