CPX1140 Trans Problems

OneBarrel

New member
Have just joined this net,hoping to get an answer to a problem we have.

We have a RTV CPX1140. if you go down a hill holding the vehicle on the engine when you hit the flat and want to speed up the engine picks up but the trans takes a few seconds to engage,its as if it slips.
This has only happend since the second oil/filter change. We use Shell Donax TD,recomended by local Kubota dealer as they dont stock Kubota oil.

Any help here would be much appreciated.

Regards

Richard
 

Ppimpin83

New member
Check tank under seat for proper level
Have just joined this net,hoping to get an answer to a problem we have.

We have a RTV CPX1140. if you go down a hill holding the vehicle on the engine when you hit the flat and want to speed up the engine picks up but the trans takes a few seconds to engage,its as if it slips.
This has only happend since the second oil/filter change. We use Shell Donax TD,recomended by local Kubota dealer as they dont stock Kubota oil.

Any help here would be much appreciated.

Regards

Richard
check hydraulic tank under seat for proper level
 

Ppimpin83

New member
Done tank filters found the unloading valve was stuck halfway replaced that and squash plates that had .18 wear on them and it’s still a turd
 
Top