hydraulic filters

want to replace ALL the hydraulic filters in my ym135 after fel is up and running also fresh oil,ifound the oil in need jd 303 or equal for $50 a 5gal. pail but need filter info.i know you guys can help me out.thanks alot.lou
 

Mark777

Member
Sorry GY,

I can't find a part number for the spin on hydraulic filter in any of my parts books.

Here's a few WIX numbers that might help the rest of your service:

Fuel - 33262
Oil - 51064
Air - 42276 (Check for exact match)
 

California

Super Moderator
Staff member
Site Supporter
I thought YM135 was like a baby YM2000, so would have the hydraulic 'strainer' (screen) behind a triangular plate at the bottom front of the transmission.

Lou, look on Ebay and get an I&T shop manual. it covers YM135 on up through YM330. It will show all that stuff.

Since this is a US model, the original operator manual for that specific model should be available also. LenS who posts here could probably provide it. It covers general maintenance.
 

lens12

New member
The YM135/155 is quite a bit different . the suction filter is behind where the suction line fastens to the trans housing. It doesn't need replacing unless it is torn.
 
Top