Been awhile since I've been around the forum but I thought I would post a picture of a tank I built for additional weight for my little Kubota. The tank is made from a piece of 16" OD 3/8" wall pipe. Ends are 3/16" plate and the frame is 3" sch 40 pipe loaded with 3/4" sucker rod before the 1/4" thick ends were welded on. Filled with water it weighs over 400 pounds. t was made strictly from stuff left over from precious jobs.
I also made the shade from a piece of 1/8" 6061 aluminum that was a leftover too. I had to buy the stove bolts and u- bolts and paint. I have $30-$35 in this.
I also made the shade from a piece of 1/8" 6061 aluminum that was a leftover too. I had to buy the stove bolts and u- bolts and paint. I have $30-$35 in this.