Front spring setting w/plow

tfdr1

Active member
For those of you that are running a v plow, what setting do you have your front springs at? Currently mine are in the middle but thinking about turning them up to get a little more height on the main plow frame. I have a few more inches to go before I max out the height on the rtv mounted bracket but trying to find a happy medium between the 2 adjustments.


Dave
 

aurthuritis

Well-known member
Site Supporter
if you can't get satisfactory results by adjusting the stock springs,i believe Kubota offers a heavy duty set for plow service. i don't have a plow so wait for others to chime in.
 

tfdr1

Active member
Thanks for your response. I do have the HAD front springs on it. I just went ahead and raised it one set of holes on the plow bracket and one more notch on springs. I'll toss the plow on after I get barn chores done to see how it sits.


Dave
 

628pm

Active member
Site Supporter
I have mine raised to top height I can get, works pretty good.
 

Attachments

  • IMG_0563.jpg
    IMG_0563.jpg
    25.8 KB · Views: 49
  • kubota with blade1.jpg
    kubota with blade1.jpg
    18.9 KB · Views: 48
Top