I looked into UTV Hitchworks and it was very expensive for what it is.
I built my own with selector valve 59.99 and some hoses made a local hydraulic shop. The entire set up was cost me less than the tax i would have paid for HW's kit.
https://www.surpluscenter.com/Hydra...t-DC-Double-Selector-Valve-DFE080-9-12390.axd
I also added a 12 Tandem valve under drivers seat with a 3 way rocker switch for tilt on my snow plow.
I tied into hose going to power steering after dump box valve. So it goes, PUMP,Valve,(New 12V valve), power steering then back to tank.
This set up allows me to have use dump box,front plow with tilt up/down without removing any quick connects....