Kubota RTV Parts/Accessories list

B

bczoom

Guest
All,

I'd like to continue the thread we had on CTR that lists our parts and accessories. If each could grab their info from over there and put it here, it would be a big step taken care of.

What I'd like to compile is a list of things done or added to your RTV. The idea is to get a composite list for reference of what's been added.

I'd like to request that opinions, questions, suggestions, installation instructions... be in a separate thread for the details but if it's been discussed and you want to add go ahead and include any link(s) for supporting information.

Here's what I'd like to see in this thread:
List any OEM, after-market or home-made parts/accessories that you've put on your RTV.
Be brief on each, but if/as you would like, include manufacturer, model, part number, approx. price, maybe a link for ordering (if you like where you got it from) and as mentioned, any existing threads on the forum that have discussed the particular item.

The objective of this thread is to provide all (including search engines about RTV parts/accessories) a composite list of what we've all done to our RTV's so if someone is considering doing/adding the same to theirs, this is a starting point. They'll know what's been installed as well as whom has done it and if links are provided, some supporting discussions. A search can be used to provide a full list of threads.

If you've performed modifications to the RTV, please use discretion. Modifications can be listed but if they're such that can be detrimental or avoid warrantee, this is probably not the place to post. If a modification is proposed that may be detrimental, it might be removed by the forum moderator/admin staff.

Thanks
Brian
 
B

bczoom

Guest
My RTV is a 2004 Worksite model

Interior/cabin area

Ceiling panel inside cabin
On this is mounted:
- Marine Stereo/CD
- 2 marine speakers towards the front
- 2 Cerwin Vega box speakers mounted to the rear ROPS
- 320w amp (wedged between ceiling and roof panel)
- 1 12V accessory plug
- 2 panels of 5 switches each - marine switches to run all this "stuff"
Stereo Antenna
3 12v plugs installed between roof and ceiling panel.
Lexan windshield (quick attach or removal)
3/4" steel pipe clamp bar (so I can use/install ATV handlebar accessories)
On this is mounted:
- GPS/Phone holder (on RAM mount)
- Pistol holder (on RAM mount)
- hand held spotlight (on RAM mount)
- 2 convex outboard mirrors
- Center rear-view mirror (convex)
Speedometer
Hand throttle
Fire extinguisher
3rd (middle) seatbelt
Coat hook

Lighting
4 forward facing lights
1 light in cabin area (Warn trail light)
1 cargo box light (Warn trail light)
2 rearward (can pivot to side) general lights
1 light under box for rear receiver area
2 Ecco Strobe lights on the roof.
GoLight Stryker remote control spotlight on roof

Exterior
Steel stick stoppers for front CV joints
Front rack
Turn limit stops
2" lift kit
Chrome rims
Maxxis BigHorn tires.
- Slime in tires
Completely replaced cargo box with new one that includes integrated storage.
Kolpin Rifle mount/boot
Ramsey 3000# winch with:
- wireless remote.
- High-range antenna
- Amsteel rope
Front mud flaps
Air horns
High-mount air cleaner
SMV sign
Deep Cycle marine battery
Engine Heater
Tranny Heater
 
T

Two Guns

Guest
Kubota RTV 900 >>> Manual Dump Purchased Feb. 10, 2007
Kubota
Kubota Front Guard V4225
Kubota OEM Roof V4217 *** Kubota OEM Glass Windshield w/ Metal Frame V4216 >> $550.00 installed
Kubota High Mount Air Cleaner Kit V4271 (ROPS Models) >> $155.00
Kubota Bed Liner V4229 >> $161.00
Kubota Mud Guards V4236 >> $23.00
Kubota Hand Throttle Kit V4241 >>> $ 51.00 ( Not Installed as of 2-2-08 )
Ramsey 3000lb Winch * Rocker Swich >> $339.00
Ramsey Winch Mounting Kit >> $65.00
Ramsey Winch Cover >>>$35.00
ITP 589's M/S Tires *** Front 27x9x12> $90.95 /// Back 27x11x12 > $97.95 http://compacttractorreview.com/cs/forums/thread/8719.aspx
ITP Type 4 c-Series Cast Aluminum Rims 4@ $69.95 each **** Winch, Winch Accessories, Tires & Rims >>>>http://allterrainonline.com ***1-877-896-7565 Contact: Robin or Amanda
Camo Seat Covers >> Greene Mountain Distributing> $69.99 *** 1-800-544-2668
Steering Wheel Cover ** Natchez Shooters Supply >>>http://natchezss.com $11.99 **** 1-800-251-7839
GLB 3200 GOLIGHT Searchlight *** Code 3 >>> http://www.code3pse.com >>> 10986 North Warson Rd.
St. Louis, MO 63114-2029 ******** (314) 426-2700
Big Sky Gun Overhead Racks BSR-2 ** $79.99 >> http://www.bigskyracks.com and at http://www.cabelas.com/
Mad Dog Gun Scabbard *** http://www.cabelas.com/
Four Peterson Adjustable Tractor Lights Recessed in Rubber Housing Part # 16369 >> 12 Volt >> $13.49 each *** 2 Front / 2 Back >>> Operators Case/ Tubular Sturdy Plastic, Waterproof # 65728 @ $4.99 ?? Safety Triangle #12377 @ $7.49 >>> Agri Supply ******* www.AgriSupply.com >>> 1-800-345-0169
Front Trailer Hitch & Pin ( Reese ) ** Rear Trailer Hitch & Pin ( Reese) 2" Ball & 1 7/8" Ball ( Reese ) Wal-Mart
Heavy Duty Snatch Blocks >>> McKissick * Yale * Johnson ***Any Farm Supply
MARINE AM/FM/DC RADIO * MARINE SPEAKERS * Marine Waterproof Radio Box //audioallies.com *** Flexable Marine Radio Ant. (Boss ) * Clarion Marine M-275 Radio ***3030G Marine Speakers ***1-866-237-2559 Sirius Satellite Radio System *** http://www.sirius.com/
Sliding Back Glass *** Essex Manufacturing ***http://www.essexmfg.com >>> $111.00 ( not installed 2-2-08 )
Full Cover For Kubota RTV 900 /// Sam's Warehouse $ $45.00
Slime Tire Protectant ( 2 gal.) 1/2 gal per tire@ $24.95 per gallon
Deer Loader *** http://www.laguarddog.com/ >>> $165.00
Aluminum Overhead Panel for Switches and GoLight Manual Controls *** Find at local sign shop approx. $25.00
Marine Gang Switches ( ebay anytime ) Up $10.00 to $25.00
Switch Pics
Heavy Duty Mats>> x's 2 *** Sam's Warehouse Commercial 3 x 3 Grease Proof Anti-Fatigue Mat #421112 @ 24.97 each
Large Rubbermaid Action Packer Utility Box >>> www.target.com >> $25.00
3-M UR-2Connector for Radio / Light / Accessory wiring $12.95 / Electric Supply or ebay >>>
Mirror >>> Atwood Ski Mirror ***http://www.sportsmansguide.com >> $21.97
Limbsaver Noise Reducers *** Wal-Mart >>> Sporting Goods Stick Stoppers /// *** Approx. $70.00
 
J

johndeeremho

Guest
2006 RTV 900 recreational camo
camo steel cab/ roof

glass windshield

ITP mudlite XTR

Warn XT30 winch with wireless control

cabelas center console
 

clutch

New member
"coast valve" RTV 900

Has anyone tried this? I saw it advertised at the Louisville Farm Show Last week. It is supposed to limit the harsh forward movement as you lift the go pedal. It is priced about $140.
 

Captain

Member
coast valve

Just do a search on this forum. You will find your answer and more. I bought one. So far it has worked great. Since I bought , there have been instructions on adjusting the factory valve. Captain P.S. Our moderator may want to delete or move these two messages to the correct thread.
 

texasjohn

Member
Well, I'll kinda take it from front to rear.

2011 1140 RTV, CAMO, roof, poly windshield (scratches easily)

Harbor Freight wheelchair carrier for 2" hitch, shortened shaft, drilled new holes to fit. Made short side to replace wheelchair ramp. Ramp for sliding deer/etc into rack carried on brush guard with bungee cord. Rubber bungee cords for strapping things down.

Black plastic truck box in carrier for supplies.

Harbor Freight 6" raised hitch insert, shortened shaft/drilled new pin holes to reduce total nose length to help keep nose out of ground when negotiating ditches. Shims in insert to reduce wobble.

Great Day universal front rack, some metal cutting/hole drilling adjustments necessary, also cut notches in poly windshield for ROPS attachment.Quality product.

Mad Dog gun supports on front rack

Tool box in front rack from Tractor Supply

Quick attach Extreme Metal Products clamps for windshield, fit 2 inch ROPS, but not poly windshield holes, adjustments necessary.

Slime in tires, just over 2 gallons in all.

Fuse box salvaged from old vehicle and mounted under hood for extra wiring/lights.

Support bar across top of front ROPS for mounting:
rear view mirror
fan
white LED light bar
red LED light bar (preserve night vision)
switch box, 10 lighted rocker switches, 30 amp, 5 different cover colors
support for hand held Stanley HID spotlight, really nice!

Big Sky 2 gun rack

12V power ports (3) with USB

string in key running around steering wheel. allows removal of key to positively avoid running up hours while stopped.

Harbor Freight 25 LED shop light Velcro mounted in opening above front seat belt attachments

LED white interior light mounted under roof

Mounted on the roof:
2 forward facing lights
2 rear facing lights
side facing lights, 1 right, 1 left

2 API Outdoors UTV Roll Cage Organizers, 1 camo at front windshield, 1 black on rear of front seat.

6 quad gear hand holds, Velcro extensions added to make better fit for 2" ROPS.

Replaced rear shield with 2 cross bars for better visibility.

Mounted plastic 2 gun rack on rear crossbars.

Kubota snorkel air intake

2500 Watt inverter with 5 ft 12 V pigtail, 50 amp male plug. Inverter hangs from rear cross bars when in use. Pigtail on battery, 50 amp female plug, stored in battery/air intake cage. Runs drills, electric chainsaw, metal grinders, etc. successfully.

Truck plastic tool box in dump bed. Rectangle "cat litter" plastic buckets, with lids in bed for cattle feed, etc.

7" rise rear trailer insert, 2 inch ball, shortened shaft to reduce leverage and make fit, drilled new pin holes.

Straight trailer inserts, shortened and drilled, for pin hitch and 2" ball. Shims installed to reduce wobble.

Winch mounted on 2" insert with plug matching inverter plug for power, 3 holes drilled to fit all my pickups, front or rear RTV receivers.

Shop made 4X8 manual dump trailer with 2 black plastic truck boxes for supplies/tools, 2" ball.
 
Last edited:

pepr

Senior Member
SUPER Site Supporter
2011 RTV 900 XT Worksite Model Orange Color with OEM ATV Tires
OEM Plastic Canopy and Speedometer
2 inch rise rear hitch insert
Home made wooden drop-in bedliner made of 5/8" plywood with treated lumber rails

Future modifications planned are:

Hi-rise intake likely home fabricated
winch with wireless remote
windshield
rearview mirrors
front mudflaps

Thanks,

PEPR
 

Heatwave

Active member
Wow ... y'all make me seem pretty insignificant in my options/addition/changes to my 2008 RTV900 "Real Tree":

DOT red and white reflective tape liberally applied all around
Peanut's steel stick stoppers
Front mudflaps
Snorkel intake
Line-X painted dump bed
Ramsey "Honcho 5000" winch w/cable remote
Rifle rack bolted to inside of cabin rear screen
Kubota glass windshield (don't waste time with the plastic one ... I had one of those, too)
Autozone rear view mirror
Kubota black plastic roof
Shackle mounted to front trailer hitch ... for snatch block work
Snatch block
Decal on windshield: WARNING: EXPLOSIVE CANOPY AND EJECTION SEAT
Official Kubota neckers knob
Thrust reversers and drogue parachute (I'm lying now)
 

Davooda

New member
texasjohn - I'm taking delivery of a 2011 RTV 1140 tomorrow and would enjoy knowing your source for the 2.5kW inverter, as this is something I could never do on my JD Gator. Was the wiring difficult?
Also - did you need a 7" rise on the rear hitch for clearance in hauling a trailer? It sounds like a standard insert doesn't fit and you had to customize...is this correct?
I appreciate a few minutes of your time if you have a chance to respond.
Thanks much,
Davooda
 

texasjohn

Member
Sorry for slow reply.
Inverter was a Craigslist find for $90, it is oversized for battery and generator..but I run it far below rated capacity. Wired fuse to battery and ran wire plug for accessibility from rear seat. Use large wire and properly rated plugs. I carry inverter in a waterproof toolbox in bed.

Hitch insert was shortened as much as possible then new pin hole drilled. Riser not used for pulling trailer. Yes used front and rear for cargo carriers to allow better terrain clearance.
H
 

ZZZ2D1

Active member
Site Supporter
2011 RTV1100 340 HRS

Hi Guys,
Finally had time to take some pic's.
Our Boatie is pretty tricked out as you can see.
Tonneau cover.
Police scanner.
carpeted floor.
Has just about every factory option you can get.
We purchased the unit in August 2011.
Top of the day to ya's
Door-Gunner
 

Attachments

  • DSCI0506.jpg
    DSCI0506.jpg
    104.2 KB · Views: 1,439
  • DSCI0508.jpg
    DSCI0508.jpg
    71.4 KB · Views: 1,426
  • DSCI0509.jpg
    DSCI0509.jpg
    63.2 KB · Views: 1,418
  • DSCI0510.jpg
    DSCI0510.jpg
    82.4 KB · Views: 1,419
  • DSCI0511.jpg
    DSCI0511.jpg
    75.6 KB · Views: 1,432

ZZZ2D1

Active member
Site Supporter
Also has amber LED flashing Lights mounted on back of headrests and
deep dark tinted rear window.
 

pepr

Senior Member
SUPER Site Supporter
Bad Dawgs recently came out with a break-away side rearview mirror to fit 2" diameter roll bars. Theirs is essentially the Siezmic version yet fits the 2" tube. One difference is the roll bar clamp is plastic. Robin at Allterrainonline.com fixed me up with a set. I've been looking for this type of mirror since July 2011. They are working great!
 

pepr

Senior Member
SUPER Site Supporter
Break away mirrors

GlennM, Hope this helps. The picture is not indicative of the proportional size. I had to resize the picture to post.
 

Attachments

  • rsz_11img_2517.jpg
    rsz_11img_2517.jpg
    66.8 KB · Views: 1,145
Top