aurthuritis's latest activity

Try operating the electric over hydraulic unit with the engine off to see if maybe its a relay buzzing?

I would check the fan on the front of the engine that it isn't coming in contact with a shroud. Also since you added a driveshaft from...

Take the shock absorber thingy attached to the peddle cable and throw it away. Then get a coast valve.

Jack up the back both tires off of the ground. Start machine and put in high gear let idle. Confirm the hst speed lever is in the...

On the x1100c the oil cooler sits in front of the fan so no water. And the gearbox is independent and is its own reservoir. Do you use...

The swash plate comes off with the cover.

If the swash plate is in neutral position or there is no hydraulic pressure or flow from the rotating valve assembly then no the...

Advice. Use only kubota filters on the hst. Use only kubota super udt fluid in the transmission and knuckles. Change the fluid yearly.

Did you put a little white lithium grease in the primary pump?

Confirm that your primary pump is primed and has flow? If it has flow then you probably need to look at the relief valves. Check your...

Better check the hydraulic oil level.

Sounds like you understand pretty good. The servo piston is just a two sided hydraulic piston that moves the swash plate with hydraulic...

Just for clarity yours is the old model rtv 1100c and is a completely different animal from the rtvx 1100c. Try putting your machine in...

Just to clarify?? Your rtv stopped moving or at least was showing some transmission issues? The oil level in the hst was low so you...

No problem and good luck. Hopefully all you need is the valve plates but if the metal came from the hydrostatic and was magnetic and...