Recent content by Beerskie

Thanks for our help. They don't seem to have m size listed, but the figured it out for me. So now to do it

Does anybody know how many gallons ballast my 43-16-20 tires hold at 75%. I've not been able to find m tire size on rim guard.

So my tractor is the 2538 hst open station. The PTO lever is on the left side of the operator and is a simple on off lever. Currently it is stuck in the on position, so still able to operate the PTO with the switches on the dash. Just wondering if anyone else has had a frozen PTO lever, and...

I now know what a carbo pile load tester is. Much better than my old fashion load tester. I see one in my future, thanks!

never heard o that. I do have a load tester that I use to put a load on a bat to test it, but I don't think it's capable of testing the alt, unless I don't know all of it's capabilities.

Finally got it working. The connection on the alt was just a bit loose, tightened and now have 14.7 to the batt. Thanks for all the help

I will also ck as you suggested for parasitic draw. thanks

With the tractor running, I cked the batt. read 11.9. then chked from the pos post on alt to ground, read 14.3 so I figure the alt is putting out as required, but not getting to the bat. I'm going to ck the wire from alt to bat for bad connection, if they re good I think I can assume the cable...

I think I ckd he ground as I ckd the alt from the pos post to ground and the meter registered charge of 14.3 so I assume ground is good. correct me if I am wrong. Thanks or the input

Has anyone had to replace the Alt cable to the bat. on a 2538 hst open station. My bat. gets low so no start. I checked the batt and it takes and holds the charge, and the alt is putting out as it should so that leaves the cable. It seems like a difficult change, but maybe just me. Thanks...

There may be, but I haven't located it yet. I'll keep looking. Thanks!

So I adjusted the brakes today to the lowest setting for max brakes, they work great, but tractor still wants to creep even with the brakes in the park mode. Is there any way to adjust the forward/reverse pedals externally? I do tap the reverse pedal and that does stop the creep for a bit and...

Yeah, LOL

Yep that's a given. I want to use the fender for my radio. At some point the lamp will light, and there will be a way. Just haven't seen i yet.

there is a sliding tubing that I suppose protects the front end so that won't work either. May have to attach o the rops bars if I have to