BiffNH's latest activity

  • BiffNH
    BiffNH replied to the thread Snow Plow Kubota RTV 1100 C.
    If you can find a used BOSS V-Plow that would be the perfect. I've had two RTV's (X900 and now X1100C) and the BOSS plow works...
  • BiffNH
    It is important to adjust the idle rpm up or down until you find the sweet spot in harmonics and the shaking smooth out. The only...
  • BiffNH
    BiffNH replied to the thread X1100C muffler bracket.
    My 2014 X900 had the transmission flange at the muffler bracket break and it took some argument to get them to cover under warranty. I...
  • BiffNH
    BiffNH replied to the thread Climate Control X 1100C.
    I did not see any residue, but there may have been something. It was not going to come off without. a puller. Anti-seize is on it now!
  • BiffNH
    FYI - I just found my muffler rattling badly and upon investigation I found the two bolts that hold the muffler bracket to the...
  • BiffNH
    BiffNH replied to the thread Front mud flaps.
    A few years ago posted about what I have done with mud flaps for my X1100C. Try this link...
  • BiffNH
    BiffNH replied to the thread Climate Control X 1100C.
    It has been a while, but I have finally found the issue with the mode control - the cable got a kink in it at the control knob and when...
    • IMG_1737.JPG
    • IMG_1736 3.JPG
  • BiffNH
    BiffNH reacted to aurthuritis's post in the thread Climate Control X 1100C with Like Like.
    Take i piece of 1/4 inch thick flat steel and cut a u shape notch in it that will just barely slip over the steering shaft. Drill a...
  • BiffNH
    BiffNH replied to the thread Climate Control X 1100C.
    The hub is plastic with a metal splined insert. I've soaked it in penetrant and driven it for many days with the nut loose. I have yet...
Top