Recent content by Blue77

  1. B

    T4.85 showing 2098 code

    Ok, it’s mostly mine. Not 100% sure as it’s not done a good days work yet but ran it long enough I think it would have coded. While looking for a wire issues I noticed wires labeled for clutch A and B. With a third valve that looked like the first valve I picked up. Service manager had given me...
  2. B

    T4.85 showing 2098 code

    Thanks I very much appreciate your help. Looks like a free operator manual and 40$ shop manual. I paid around 60 for my lost operating manual from the dealer and of course found mine soon after. I have a lead I’m chasing now, may be a misunderstanding on my part. Will own up to it only if I...
  3. B

    T4.85 showing 2098 code

    No luck so far. The wires that caused the fan issue are fine and don’t seem to be related to the current issue. Checked the clutch peddle switch next. Shows 4.9 volts at rest and down to .5 volts depressed. Seems to be functioning. Volts drop with movement of the peddle. That makes me think that...
  4. B

    T4.85 showing 2098 code

    I had a thought after reading your reply. I did have an issue earlier this year with airflow in the cab. Turned out some of the wires were making contact with the fan just below the cabin filter. Left hand side while in the seat. It’s the same side as the dump valve. ??
  5. B

    T4.85 showing 2098 code

    Understand, I am kind of hung up on the heat part. It’s very consistent when it’s likely to code. I just don’t see heat and short to ground being related. May make sense when I find it. Nasty little problem, coded when settling a bale 4 high in the barn while I was getting out from under it. Not...
  6. B

    T4.85 showing 2098 code

    I agree. Dealer and I felt changing the dump valve solenoid would be the best bet. I did that and no change. He said that code was specific to the dump valve and a short to ground. Wires look good to the harness. If I had a somatic it would help. My guess is the clutch, lever and valve are what...
  7. B

    T4.85 showing 2098 code

    Any ideas on the 2098 code. What I can find is an electronic issue with the dump valve. I replaced the coil on the valve and still have the issue. Fine when cool, as it gets to operating temp it will code. Self clears after a few minutes. Example, 20 bales to unload and stack, on bale 17 it...
Top