Recent content by Blueforce7710

  1. B

    Ford 8210 Noise in top end

    Thanks for sharing. I released the tractor back to the field. That was some engine strip maybe the crank is off slighly but if it was it would get worse and worse. Anyways you have given me confidence in mine its purring well on the road when loaded its just that knock was bothering me but the...
  2. B

    Ford 8210 Noise in top end

    Sorry lad no answer on this, do let me know if you find anything
  3. B

    Ford 8210 Noise in top end

    Hi, you continued to work the tractor with the noise?
  4. B

    Ford 8210 Noise in top end

    Hello all I’m back and no change unfortunately. I swooped injectors to another as advised I would have thought there was slight change and had to be it. I got all 6 refurbed and tested and the noise is still there. So valves checked all good. No broken valve springs, oil pressure seems good...
  5. B

    Ford 8210 Noise in top end

    Thanks. Valves were done now to spec and the noise is still there. I’m thinking could the injectors be an issue here? I cracked them open with a spanner while engine ran and found noise change slightly on number 5 but not certain could say the same about 2 . Impact noise kind of dampened and not...
  6. B

    Ford 8210 Noise in top end

    I’m using mm also 😆 sorry
  7. B

    Ford 8210 Noise in top end

    Hello everyone. I have had a friend in Sweden who reports noise in his Ford 8210 1988 gen 2. It’s like a tick noise at idle and at mid high rpm can be heard in cabin closed. Trying to check the valve tappets but see it’s 75% slightly under tollerence than over it. One valve was out a lot. Here...
Top