Ok parts came in and put them on. I ended up installing the low volume ele fuel pump and I still can’t get fuel thru the injection pump. The shutoff solenoid is on. Question is I don’t see it doing much when I turn the key on. Does it shut the fuel to the injection pump off. I have turned the...
I need a small 3 point chipper for what’s left after the dozers get done clearing 5 acres of pines for me. The trees will be sold but the tops and crap left over I can chip up the 3 ta 4” stuff. I don’t want to be burning piles for months. I saw a nova that is good for 18 hp to 30 hp. I’m not...
Ok I blew air thru tank and it came out the hose on the out side of the pump. But when I crank it none comes out. I’m guessing pump is bad and needs solenoid just because I have it coming. I’m going to drain the oil and change it in case any got in crankcase by chance also. Waiting on parts.
I have a lot of fun in this machine, but I’ve been building my ranch house on the weekends by myself for the last 2 years. So it has just sat. I started it every month or so and it ran fine. Just this time it didn’t even give a good chugalug. Sputtered once or twice then blank.
I haven’t used it in a while and tried cranking it. It sputtered a couple times but would not start. I chalked it up to fuel and drained the tank and filled it with new fuel, changed filter, hooked it back up and nothing!!! So I figure it needs priming now and loosen the nut on the injector...
I scored a 3.5’. Cat 1 box blade for her. $175.00 on Craigslist. (Cha ching) I hooked it up and did some testing with it and the matchup was perfect. It’s a little rusted and has a ding or 2 but it’s an implement. The specs on this 372 say cat 0-1 so either will work on it. Found a 3 point...