Recent content by magicheater

I did mine at 40.75" center-line and it worked out great. By measurement it is a tad more but after measuring the loader arms at various place it seems they taper in towards the bucket. Hope this helps....

The bucket pins are 9.5" apart, on center.

The LA402 for some reason does not bucket stops. Don't know why. I have one and have not had anything bad happen and I really USE my loader a lot.

Just curious what others prefer to keep on their FEL's and the 3PH for everyday duty. I have a favorite combo which consists of 2 homemade attachments. Let me know what you like and why? Thanx in advance!

Thanx and it is. You summed up things well.

pics of Loader Buddy Here are the pics. This particular model is a 4' version mounted on a B7800. A 5' quiktach version is in the works as well. Thanx for the interest. Loader Buddy

I checked my manual on an L4350 and the intervals are 200 hrs for filter and 400 hours on the fluid. It states when changing the filter "Detach the filter and install new one". It also reminds you to clean the magnetic filter tip. I normally scratch the hours at which I change filters on the...

I used up the whole box!!!! This is a good thread, many valid pros and cons for QA vs. not, etc. Tractors started out built to pull things and probably why they all have 3PH's. International had the 2PH but now 3PH is standard. Loaders came later and then the whole skidsteer market and the...

Logan, sounds to me by your tire size you have the R-4's on your B7800. You should have the room for chains as the R-4's are smaller in diameter than the turfs or ag style tires. I have the same tractor and recently upgraded the fronts to 23X10.50X12. Had a hard time doing it but finally found...