Recent content by Man4fire

Hello by best Kabota tractor friend. I’m really ok with 21 mph and low end power intact for now. Between rebuilding the hst and freeing up the brakes and getting throttle correct (ish). I got to move on to lights, winch, life’s other projects. I can’t thank you enough for your essential help...

No it’s all the way up

OK, latest update. I’ve gone through the adjustment process in detail and there’s a fine line between the low idle and the high RPMs. There’s only so much articulation in the connecting arm that goes to the detent arm where either you get low idle or you get a top end RPM without Changing the...

I’m on a fishing trip for a couple days. The throttle cable from motor to linkage to pedal cable needed ordering. Will be in on Friday. Start sat. I’ll be able to answer your question. Thanks. Mike

Probably seems sloppy

OK we’re getting closer Thank you for your help. I’m on a few days of. Happy thanksgiving Back at it Sunday✌️🙏

OK we’re getting closer. I got the way it works. It leaves little room for error. That being said. I pushed pulled and started at tic on the detent and wot and worked backwards. Bottom line I need a new cable from throttle to lever replaced. It works and I got 21 mph today. Thank you for...

Probably seems sloppy

Ok. Had to stop for the evening. Quite a dance with linkages. I get full throttle now but now the idle is high. The only way to achieve the high stop ( because the throttle has only so much travel was to shorten the cable just a bit. I could not get peddle down and then idle down. I think I get...

Whew. I’m gonna have to stare at it for a while to get it to make sense but hey I made it this far. Press on!!!! Thank you. Lots of linkages. I’m pretty sure I get. Diving in tomorrow👍👍👍✌️🙏

Ok. Thanks for your patients. I’m sitting at 3750 rpm at high stop. 1/8” of stop using pedal. 1450 at low idle stop.

18 mph running. Top speed tomorrow. I’ll figure it out. Thank you

ok it’s just me and what ever I can get to get the throttle up and take a reading. No fixed tech yet. I got 1440 low idle and 3540 pedal pegged. Call it 3600 cause I had a little bit more 1/2” to go ( stick to short😂. Not sure how to check high without pedal and get each reading at the same. But...

Thanks going out to set high stop now 👍

copy that. My wife’s father is not expected to make it through the day at 96 + years old. It’s0715 pdt here. I may get pulled away at some point but i 100% understand your instructions. Thanks so much. More to come.