Recent content by mgrick

I also live in western mass and was hammered with 30 plus inches of wet snow. Having a 900 ft gravel drive way I went with the Boss V plow on my RTV X1100C. My 6 ft snowblower on the back of my DK35 uses the cheap grade 1/4" bolts for shearing. Even when I had my Honda 5518 with 42" front...

I put the chains on in late fall and leave them on till it stops snowing. It's not a car!

Chains

Mine rattles, and it's pretty loud. A lot of times I just leave it down. I'll have to try your fix when it warms up. Thanks

Your lucky then. Mine can shift as smooth as butter one time and hang up the next. Plowing is when I have the most issues. Raising and lowering the plow does help at times. Also with the weight of the plow up front it will pop out of gear when backing up on an incline.

Mine was pretty bad also, dealer picked it up and also noticed how bad it was to shift gears. They made some adjustments which seem to have helped. Unfortunately there are times when you have to try several things to get it unstuck. It's just the way it is! Mine will also pop out of gear...

Kubota front light switch part number T1065-75360 Rear light switch T1065-75370 They are not cheap!

They should be taped up behind the console. Take the 2 screws off and remove the console if you haven't already. One plug is for the radio, the blue plug is for the rear lights and the whitish clear one is for the front lights. Easiest is to pony up and pay for the lighted Kubota front and rear...

I press on the brake as your supposed to but that doesn't always relieve the pressure in my case. I have to blip the throttle or lift the plow or drop the plow. Sometimes I can get away with shifting as the plow goes up, sometimes I have to hit the brake just as the plow hits the ground. It...

I'm running the Boss V plow on mine. The added weight seems to make it even harder to shift from reverse to low. Dealer picked it up and also noticed the shifting issue and made some adjustments. I shift a lot when I'm plowing and it really takes the enjoyment away. Even after dealer made some...

I bought these off of Amazon, they are better than stock. No issues. VehiCode 880 881 LED Fog Light Bulb Slim Conversion Kit

Other than Kubota lights I don't believe anyone makes there lights with that style connector. Just do what I did and cut them off and use butt connectors.

I just checked one of the green striped wires behind your switch panel and went to the black ground wire. Turned the ignition on and had 12 volts. I would have to say the 2 green stripe wires would be your hots and go to the switch. You could use one of the black ground wires to light the...

Kubota dealer.

There are 2 plugs, one white(front work lights), one blue(rear work light). Those plug into the Kubota priority lighted switches. These are taped up with one set of green striped wires with spade connectors and a set of black wires with spade connectors. one of those sets could be for the strobe...