Smilingreen's latest activity

I spent the day on the CTL, exploding trees in the woods with the new brush cutter. Early this evening, my wife called on the phone and...

https://www.protoolreviews.com/canada-ban-pistol-grip-power-tools/

OK, well seeing the schematic shows the sensor utilizes a NPN transistor, I mentioned the ground connection. Using an ohm meter, check...

I have checked all the above already. Just bought a new meter assy and that did not fix it so either I bought a bad new sensor or the...

It looks like that sensor goes to the ECU, before the ECU outputs a signal to the gauge on the cluster. To test a MRE type sensor, you...

Driving my trails I'm back to thinking I really need an excavator with a brush cutter. Off my trails are steep, either up or down. I...

With having both excavators and CTL's on the farm off and on through the years, you have to look at what machine would get more use...

So impressed. I've been wanting an excavator with a brush cutter. Now looking at your setup a CTL with a brush cutter might do the job...

This cutter is a 72". You can also get it in a 78". The price for the high flow cutter was a little over $10k. Ordered it from the...

Very impressive. :wow: What is the size and price of that monster brush cutter? How hard and how much time does it take to swap...

This was a 12" diameter cedar stump that stuck up out of the ground about 8". I have been mowing around this damn thing for about 15...

Ok, here is some pictures I took of about 3/4 of an acre I cleared yesterday afternoon with the new brush cutter. This whole area was...

I ran a 299D3 last fall with just a bucket on it here on the farm. She had plenty of power, but it had the 110HP engine in it instead...

Possibly, Doc. That is the bet that I took when I bought the CTL and ordered the brush cutter. I looked at an excavator and a drum...

Can't wait to see it with the brush cutter. Something like this might be able to replace my need for an excavator with a brush cutter...