Search results

  1. F

    RTV-X1100C Floor Mat Recall

    Respects, but might I suggest if one takes that route, the under body receive the same treatment...after first removal. treatment and prep for any existing corrosion. Rust will rot you out from the the top and bottom once it starts. YMMV.
  2. F

    RTV-X1100C Floor Mat Recall

    Sorry folks...I forgot all about this. If what's shown in post 8 is that Service Bulletin...then it was not done to mine.
  3. F

    Road Dust Infiltrating Cab 2020 X1100C Kubota

    X1100C is already tighter than any other cabbed buggy guys bring to work, so perhaps my expectations were lower because of our environment. Me...I just blow it out and wipe her down once in a while. You already have to close the door with a little attitude with the windows up as it is. YMMV.
  4. F

    RTV-X1100C Floor Mat Recall

    I'll look at it better when I get to work, but they just trimmed it up a little more around the right peddle. Folks, I work 10 hours a night with this mobile toolbox/transportation and the ONLY complaint I have is the crappy sound system.
  5. F

    RTV-X1100C Floor Mat Recall

    After purchasing mine, I took it to my closest Dealer for "full service" as my duty cycle is severe. They performed this and 2 other SBs. I don't have a problem with it.
  6. F

    RTVx1100c Fuel tank capacity

    Thanks for this validation folks. Three times now I have experienced my engine sputtering out at 2 bars when turning hard at speed. At first I thought is was just water I needed to sump out, but later decided it was just a calibration issue. Needless to say I now fill up at 3 bars and keep a...
  7. F

    Reverse Lights for 2018 RTV X1100C

    My guess is if you were inclined to post a detailed illustrated how-to there would be a lot of appreciative people out there...my self included.
  8. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    Just to follow up on a comment/question earlier posed. This is an example with a lessor capable Gator, but it also applies to the Kubota regarding the dump function with a Van Box installed.
  9. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    Yes...our jobs and work environment are both challenging and hazardous. That said...I would like to report the RTV X1100C has passed every test with flying colors. Only have about 4 years left, but the FNGs are already lining up to buy it when I retire.
  10. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    So...now that the legal disclaimer has been handled... ;) Most all of out carts and equipment are two axled with turning front trucks and no downward tongue weight because the attach arm pivots vertically...but they all exceed maximum pull restrictions of any UTV. We also use the pintle hitch...
  11. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    "Are these products something everyone needs...no...just as not everyone needs to plow snow, spread fertilizer or whatever. Respects to all who buy these RTVs and for whatever use the provide, but some of us operate/work under a different and more severe duty cycle." ;)
  12. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    Good questions. Edmunds Metalworks is the manufacture of the "modified" Van Box I will am getting. First looked into them some 10 years ago when I bought my soon to be sold Carryall 295...even dropped by their facility in Florida while visiting some in laws. Excellent product. They do not...
  13. F

    RTV X1100C Passenger Seat Back Removal

    Figures. Just wrapping up a work and I am not motivated to take all those bolts off just to secure some Velcro to itself. Think I'll just tie it off and walk. Thank you.
  14. F

    RTV X1100C Passenger Seat Back Removal

    Best info I can find...and to correct my previous...4 each bolts holding it. Will take a good look again if/when I have time tonight and pass it on. They are sandwiched in there somewhere...but definitely not through bolts to outside the rear of the cab. Below is for said rear/back cabin...
  15. F

    RTV X1100C Passenger Seat Back Removal

    Stupid question time. When installing my seat covers couldn't figure out how to remove said item to secure the cover with the velcro strips...and there is no access behind it. When I installed my hitch extension/skid I looked at it again before leaving and still couldn't figure it out...but...
  16. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    Understand. Our buggies are more like mobile toolboxes that are also used to tow larger and/or heavier parts and equipment. With this one though, I will have the well earned luxury of an enclosed cab with HVAC. ;)
  17. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    Bodies? Are you referring to the (cargo) Van Box?
  18. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    Will recheck all clearances when I go to work, but 99.9% sure I'm good. Thanks for the heads up. A modified version of this Van Box and the mirror drop listed below are in work.
  19. F

    UTV Hitchworks Receiver Extension/Skid Plate and Transmission Plate

    This one's for you TechJunkie...and anyone else interested. This afternoon I stopped by work to install the Hitchworks UTV-XECP kit and was pleasantly surprised how easy it was. The quality is excellent and they even included the extra hardware needed for the later Model 2020 and up RTV-X900...
Top