Search results

No problem Xtroooper, I got all my information from this site and was glad to pass it on. Randy

Same here, works good now. Thanks

I have a Mac also and it does the same thing. I can't find anything that I can do with the cookies either to stay logged in. I am alright on the other sites. Randy

Looking at the build your Kubota website they have listed a hydraulic removal kit listed,maybe something has to be inserted or connected into the hoses when you uncouple them?? If they gave you the plow installation booklet, it might be in there. Randy Hydraulic Control Kit $2,179.00...

I have an 2008 RTV 1100 with a plow but not the same as yours. Is there some place that you need to hook the three hoses to? Maybe under the front carriage. Randy

c0ke, That is correct. Randy

c0ke, 1. The ant rem wire is only used if you have an ant that is a power electric ant that need to go up when you turn on the radio, not used 2. You hook up the red wire to the accessary fuse that only comes on when the motor or key is on, that will let the radio come on when the motor is...

Here is the plug's website http://www.allelectronics.com/make-a-store/item/CON-90/9-PIN-CONNECTOR/-/1.html Randy

c0ke, I never did get an answer on that from the dealer. Randy

c0ke, http://www.crutchfield.com/ is a good place to get an idea of the ones available. Here is an installation document, figure 2 shows the sleeve I was talking about. http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/pdfs/receiver_guide.pdf Randy

c0ke, Any radio with a single DIN bracket which is the standard. Double din is for the larger radios and is too big for the Kubota. So most radio's are the single din size. Randy

c0ke, The mounting bracket is on the radio. It's the wrap around piece that is around the radio. The plate that came with the Kubota is the backplate that goes behind the dash and you bend the mounting bracket up against the mounting plate. Take the mounting bracket off the radio and put it in...

c0ke, The wiring diagram should be on the radio that you are trying to install. Just convert the radio's output color code to the new plugs color code. That is , if your radio requires a constant 12 vt hot source and the color is purple then you splice it with the plugs red with white stripe...

I guess I should have checked out that address before I listed it. Try this http://www.allelectronics.com/make-a-store/item/CON-90/9-PIN-CONNECTOR/-/1.html Randy

Her is the site to get the connector and also the wiring for it. This was from a posting on compact tractors forum I believe, I can't remember the contributor but this was very helpful. Randy http://www.allelectronics.com/cgi-bin/item/CON-90/search/9_PIN_CONNECTOR_.html To keep from cutting...

I just did that and everything is working fine now. Randy

I have the OEM worksite tires on my RTV 1100 and they have worked well for two seasons plowing my driveway. There is an incline coming up my driveway but have not had a problem with slipping.</p> Randy</p>

Re: Transmission drain plug = 10 mm After looking at the drain plug and calling my dealer, I found out that is was indeed a10 mm drain plug. I took off the cover and checked it out closely and after cleaning out the dirt in the allen screw ,the allen wrench fit a lot tighter. It took quite a...

Thanks muleman, that explains why it felt loose with the 10 mm. I didn't want to really beat on it until I knew I had the right size. the largest size I had was 10mm. Off to the store now.</p> Randy</p>

The plug I am trying to unscrew is on the bottom in the plate you mentioned in that hole you talked about. I didn't check to see if there is a hex shape to the allen screw but will tomorrow.</p> The picture in the workshop manual shows a allen screw only but does not tell the size of if or if...