Search results

So if anyone is following this I called the dealer ordered another cable, to the tune of just under 75.00, Oh well could be worse. So I bought this RTV used with 250 hrs and it has always shifted the same in and out of 4x4 HARD like bad engagment lever would almost spring back always figured it...

Problem Found Bordercollie, thanks for the info I had read this and it caused me to look further. After disconnecting the cable at the transmission I soon realized the cable was broken. I had to cut the rubber boot off to see this. I think it has ben broken since I purchased a few years ago...

Ok need some help rtv 900 stuck in 4x4 cable is not broken bent, not sure where to look anyone had this happen? Worst part is the lever is in 2 wheel position and feels bound has to be in the case somewhere. has always been kinda hard to shift... Any help would be appreciated. Thanks in advance...

That tube holds my homemade forks I will try to get you guys a picture they work really well, easy to adjust, easy on off!

I have just a genral light weight 60" atv plow on mine and love it! works with a small warn 1700lb winch cost used was about 350.00 and worth ever penny. As far as strenght I have hit a few things and not hurt it at all

Is that a modded exhaust system?

Well the biggest problem was the sides spreading out and the gate not closing without a hug..so to speak! So I think the 3/16" diamond plate on sides and the new front of the box are going to be a huge help, has zero flex, oh I also added a piece of 3" c-channel to the underside at the back so...

No amount of insulation will keep the wife from burning the stove to hottt!! Lol never leaks so it's really no problem!

Have gotten a lot of good usefull info from this site, thought I should share just a few pictures of my machines afterworking in the snow :) My newest addition was rebuilding Kubotas weak RTV box design, now I can haul wood without destroying the box :)

It actually replaces the weak cover they have over the trans filter above the oem hitch, yes i can derive it from that old cover was just looking so i could get a drop peice of steel ordered, my RTV is about 2 hrs away right now! Thanks for the reply

Hey, just wondering if any one has one of the Kolpin 2" rear hitch set up? If so would you give me a dimmension of the c channel used I would like to make 1 or 2 as i cannot see paying 145.00 for it! Thanks in advance for your time

All this talk about plows and this is the coolest yet! (my 2 cents) sorry if you all already know about this site www.kanlan.ca </p>

</p> How much is it? does that work off the dump hydro or is it electric? thanks Chad</p>

I was hoping someone could measure there stock windsheild for me height and width also if you have the doors could you tell me are they roughly59"x44" at highest and widest points? any help would be fantastic, Thanks Chad</p>

Ok so the unit I just bought does not have the hydro dump, my question is anyone out there that can get a better deal than 1300.00 bucks? Or maybe you have it and don't use it enough and would consider selling yours....long shot I know..lol but any help would be great. also anyone ever make...

Ok I am new and just purchased a used RTV 900 I see on ebay there is a guy selling a valve that lets the rtv coast and stops all the jerky motion. Has anyone used one? 150.00 bucks for this little homemade deal is steep! Thanks for the help/info</p>