Search results

I took 20 minutes and made and installed a screen as I mentioned in an earlier post. The "FIX" is simple, quick and should keep mice out of the fresh air section! It is made with 1/4" hardware cloth (8" x 4.5") bent as shown in the photos. Access to the opening is limited, but it is easier...

I bet a 1/4 inch hardware cloth "cover" can be made to keep mice out. It is a tough area to get into, but I suspect something can be fabricated to close off the intake. It can be secured by self tapping screws into the black plastic baffle. I set a mouse trap in the engine bay of my car and...

Yes - something smaller than 1/4 will work. When I put my vehicles (trucks, vans and autos) up for the winter I place very coarse steel wool in the air intakes and the exhaust pipes to keep mice and squirrels out. They will pack a muffler so full of acorns that the engine will hardly run! if...

After about the first 100 hours my X1100C alternator belt needed to be tensioned. Smilingreen is likely correct.

I got 10,000 miles on my worksite tires. Dirt roads and plowing.

I ordered one of rleonard's dashboard retainers and it is a perfect solution for the flat dash of the X1100C. We worth the $40.00. I highly recommend it.

Here is one that appears to be a perfect aftermarket that is not quite as expensive as all the others that I have found. https://www.amazon.com/Filter-K7731-87050-Replacement-RTV-X1100CR-RTV-X1100CW/dp/B0CKQXG956/ref=sr_1_fkmr0_2?keywords=OEM+K7731-87050&qid=1704227590&sr=8-2-fkmr0

Hi Bob, I did order the USB charging port and have quickly explored the area to put it. Where did you run the wires thru the firewall? A quick look hasn't produced an easy solution that I can see. Where you placed it makes the best sense. I have "hot" wires in the switch panel in the...

I'm nut sure my PM to you was actually sent. Not completely sure how this works. In any case let me know if you got my information - my reply shows up when I click on your logo but there is no way to be sure it was sent. Cheers and thanks

Sorry - I was going off my list - glad you are all set now. Good luck

I purchased the bracket and switch for the back-up beeper without the beeper. Go to Messick's parts site: https://www.messicks.com/ku/90479. From there go to OPTIONS and then find the Beeper option. The parts diagram is there and shows the back-up beeper parts. I purchased the switch $25.36...

Very nice! This has been on my "to think about list". If you do get into production I am interested as well. Tell us more about the USB port installation.

You repaired it? Warranty repair?

That is interesting. When I was researching this I read a comment from the dealer (I believe) that said it is for bagged rock salt only and that is what is listed on the specifications sheet.. I have almost two miles of dirt road and much of it is near the Lake so I don't use salt. IF the...

Any progress on determining the source/cause of the leak?

That looked great at first - but it won't handle sand! :(

I had a problem with mice getting into the hood liner/insulation of both our cars and then chewing through the hoses for the windshield washers. I purchased a spray bottle of capsaicin - used to spray fence posts to keep horses from chewing on them - and I haven't had a problem since I sprayed...

This might work - looks like this male would fit in the female you show in the jpeg. It is Kubota part number 1C010-65830. https://shop.equipmentshare.com/products/kubota-coupler-assembly-1c010-65830 Good luck

Thanks Homestead342 for the information. As soon as my extended warranty runs out I may order one.

I wanted to drop the RPM's at idle when I first got my X900 back in 2014 and I was told that the idle is not adjustable. Since then I have not inquired or explored more. On my new X1100C they have a hand throttle so the "idle" speed can be increased for cold weather start-ups. Let us know if...