Search results

I purchased several rocker switches from Amazon and they work well. I did have to file a bit on the switch panel to get them to fit, but it was an easy modification. I used it to wire in the radio so I could run the radio while the key is off. There are several switched and hot wires behind...

Good for you. I bet you will love it - even if it needs a bit of work. I am not familiar with the pre X series, but it sure has good pedigree!

I found this video and enjoyed it. Thought I would share with anyone interested in winter fun with their RTV.

Good work.

What a difference having an intermittent wiper ! Today during some snow I could easily adjust the periodicity to match the snow fall. Certainly worth the $26.00 and a few hours of work. So much better than running the wiper "as needed".

These are now sold.

The most difficult part of the project was reaching in and around to get the pot lined up with the hole. My hands are too large to easily reach around the frame for the radio. I know I would not have been able to get it into place if all I had to hold was the small potentiometer - even with...

Yes, the shaft is a round split type. Good luck with the installation.

Great! Glad to have them find a home. You can send me a check and I'll put the box in the mail as soon as I get your mailing address. I will be sending via USPS since that is easiest for me to get to. You can send the anytime or wait until you get the package to confirm condition and fit...

I went from a RTV X900 to the 1100C last year and I love the heat and defrost. A world of difference. Before the 1100C I would do the initial plowing with my F350 and after the storm I would use the X900 for clean-up. Now I do 80% of my plowing with the 1100C! Very nice machine - the cab is...

Thanks Doc! Nice and simple for reference.

Less than 300 hours on dirt roads only.

I have a pair of take-offs from my X900 and a new set of HD springs. When I put a Boss V-Plow on my X900 I needed to replace the standard front shocks/springs with heavy duty versions. As a result I have the original shocks - fine shape with extra heavy duty springs as well. Part #'s are: Shocks...

Thanks to Indiana Kubota I went ahead and installed the wiper delay mechanism (https://www.amazon.com/12VDC-Windshield-Wiper-seconds-Assembled/dp/B07R4G5Q3P/) and his schematic helped. I did, however, find that in my 2021 model of the X1100C the wiring was a bit different. I have produced a...

Indiana Kubota - I installed the board today and it seems to work OK. Kubota changed the wiring to the switch on my 2022 model so I had to make a slight modification (the lead to the motor is in the middle and not the bottom of the connector). Fortunately I checked it with my meter before...

Thank you very much. Nice to see that the unit will fit in so nicely. Thanks for the schematics.

OK - Shipping via USPS will be $61.05 (priority) and $56.00 (regular). I'd like to have these used, and I can't use them, so I will send them to you via Priority for $120. The shocks have only 300 hours of dirt road travel on them. The separate springs are new and never installed. Attachments...

Yes, I still have them - haven't been aggressive enough in advertising them. Here is what I posted on Craig's List: When I put a Boss V-Plow on my X900 I needed to replace the standard front shocks/springs with heavy duty versions. As a result I have the original shocks - fine shape with extra...

Our Transfer Station and Town Garage heat with used motor oil so disposal for me is easy. Check to see if some garages in your area heat with used oils. Waste oil burners are highly efficient.

I had the same experience. Posted on Craig's List and within 20 minutes I had three replies. That was in the late afternoon and by 8:00 the next morning it was gone! Congratulations on selling it so quickly.