Search results

I like the soft doors on my 04 rtv. They r lite weight & easy to remove if necessary. I usually leave them on all summer & roll up the soft windows as vfr700f2 does. My only issue is, as I stated before, the fit of the weather stripping on the front edge. A little gap produces A LOT of cold air...

I noted in another post about ground issues. I think I should add an additional ground wire to head off any future problems in that area. The light is a Harbor Freight work light for about $10.

back-up lights Hey, Here's some pics of what I did to install a back-up light. I purchased the beeper switch (only) from the K dealer (can't remember how much). It has tab coming off one side w/ 2 holes for mounting. I cut a piece of 1/4" aluminum plate (2 2/4" high X 3" long). On my 04 there's...

Got my taxes done today & I don't have to pay in anymore - it's a miracle!!!! So, hopefully I'll b e able to post some pics & some notes on what I did for my backup light on my 04 rtv.

I picked up the reverse beeper switch from the dealer & made a bracket that mounts on the linkage on the trans to turn on a $10 work light from Harbor Freight. I'll try to post some pics & a description soon - it's tax time - but I'll get on here asap.

I renewed my NRA membership recently. They sent me a small pocket knife for renewing. Yep, u guessed it - stamped "Made in China"!!!!! Come on - Really!!!!

Hey PA Jeep, BIGGER speakers!!! Like in the movie (A Christmas Story) "Hey kid, you'll shoot your eye out". "Hey Jeep, you'll bust your ear drums". (lol) U must have a bigger cab than I do. On another note - Hell with console - I want the tool box & contents in the background! All kidding...

And the those cable ends keep binding on the hooks on the box! I'm going to replace mine with chains - great idea.

6mmrem, Where did u buy the oilpan heater & the turbo kit? Let me know how the install goes. I'm interested in putting a turbo on my 04 900 rtv. Thanks, Popo

Racerface, I just went to JC Whitney & they do have a magnetic heater that looks like it would work for me - $76.

razerface, the 2 heaters plug into the outlet box & the cord coming out of the top of the box is common for both outlets. If u look close the cord goes over the top of the frame. There's a cable clamp (in the photo) that keeps the cord secured to the cab frame. then there's a 110 plug-in on the...

bordercollie, It's handy to have the console drop down like that for future additions. Mine does also & each of the 3 bottom panels come off for additional access.

I had the same concern w/ my 04 rtv - the gauge appeared that the engine was getting close to over heating & the fan never kicked in. I thought maybe the fan or switch was defective. I located the thermo-switch (on the thermostat housing) - grounded the wire & the fan came on. So, I took the "K"...

bczoom, Yeah, u r right the receptacle under the box is for the heaters. And the inverter is under the dash on the passenger's side. My better half whined enough about not being able to see when it's raining so got her a wiper kit for her side. I wonder if I can get by calling it her birthday &...

04 900 rtv Here's some pics of my 04 rtv. It has 27's on aluminum wheels, spray-on bed liner, work lights on the rear roof, fog & driving lights on the front. I made a custom mount so I could install a Warn 4700# winch on the front. The overhead console is custom - couldn't afford the Kubota...

I got my materials at at Discount Steel (www.discountsteel.com) a local company. I'm sure that they would ship anywhere & they can cut to any size u want.

Obviously Peanut is one hell of a fabricator - nice welding!!!! Do u do that for a living? All my welding is self-taught. I haven't attempted aluminum yet. I have the equipment (my retirement present to myself) I just haven't had the time to play with it - I should take some classes. Nice work!!!

overhead console Mark, I saw your post & I thought I'd show u the one I made - I didn't have the money to buy the high buck one from Kubota. Besides I had fun making it. I got some 1 inch stainless angle iron, cut it into pieces, tig welded it together to make the frame. Made the flat panels...

My 04 rtv came from the dealer w/o any spark arrestor. Then one day the dealer called & said one was required so, they came to house & installed one - it consisted of a 2 inch piece of folded screen that they shoved up the tail pipe & a cap (w/ a little set screw) over the end of the tailpipe to...

fuel filter Donaldkubota, The filter I used is a Sierra 18-7844 from Teleflex Marine. Their web site is www.teleflexmarine.com. If u go to their site they have the filter kits which includes the filter & the mounting bracket. They probably list dealers in your area. The filter is a 10 micron...