Search results

I use a 4000 warn remember the bota weighs almost 2000lbs. never hurts to go bigger less strain on winch.

ok to get back to the creep adj what is shown in the pic (of the bota) is the hst. if you disconnect the lever from the rod and move back and forth you can feel where it should center (reconnect rod so it fits at this point.) Then there is an adjustment screw on the side of the hst with an...

I have the essex sure foot tires and love them. The weight is not that big a deal and they are designed to hold the weight that the kubota can carry. The itps are rated at around 450lbs a tire so with a cab and two people you are over weight on the tires. I am very pleased with the sure foot...

awsome plower I have a 6.5' myer plow on mine. I do run different tires though 26" sure foots

looks like they are pushing the pedal up instead of down to go in rev. don't know about that switch though.

I had this same problem.All you need is a buzzer ofsome sort, I used a low air alarm out of a mack truck but anything that makes noisewill work.Tap the power off the park brake light and hook the buzzer to that. Works well and you will allways know when the park brake is on.</p>

I bought and installed the lift kit on my 900. I also put the hd struts on as well the camber on the tires was huge. I ended up just taking out the front lift (as the hd struts Lifted it any way) and kept the rear lift in. The rear lift gives you no extra ground clearance but it does let you add...

Don't do the 27" tires if you use your bota for work. The bigger tires change the gear ratio and you loose lots of power (torque).</p>

<span style="font-family: Arial; color: black; font-size: 10pt;">How bout a cover over the alternator so when your loading the bed with dirt and it spills over the front of the bed it wont get into it.<o:p></o:p></span></p>

</p> <p class="MsoNormal" style="margin: 0in 0in 0pt;"><span style="font-family: Arial; color: black; font-size: 10pt;">DO NOT GO WITH 27" 589 TIRES, you will regret it. I had them on my rtv and sold them and got the sure foots. The 27" tires are too big, not because the rtv can't handle them...

heres my road grader.</p>

</p> <p class="MsoNormal" style="margin: 0in 0in 0pt;"><span style="font-family: Arial; color: black; font-size: 10pt;">I'm not sure what else they did when they replaced the shift fork. I assume since they had to split the HST open to change the fork inside the Trans they went through all the...

Kanook</p> Do you have a shop manual? There are a few places to check pressures on the hst, and an adjustment to for the creep if adjusting the hst lever did not work. It does not look too hard to do these checks and adjustments. I'm thinking your neutral setting is off. There is a screw on...

<span style="font-family: Arial; color: black; font-size: 10pt;">After reading my post on shifter adj I left something out.</span></p> <span style="font-family: Arial; color: black; font-size: 10pt;"></span></p> <span style="font-family: Arial; color: black; font-size: 10pt;"></span></p>...

<span style="font-family: Arial; color: black; font-size: 10pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;">My 04 did the same thing yours is doing, until my shift fork broke in the Trans. I brought it to the...

Kanook,</p> Have you tried to adjust your shift linkage yet? I'm sure it will help.</p>

<span style="font-family: Arial; color: black; font-size: 10pt;">Something to protect the plastic hyd tank from a rear end collision<o:p></o:p></span></p> <span style="font-family: Arial; color: black; font-size: 10pt;">Dip sticks so you don’t have to lift the bed<o:p></o:p></span></p> <span...

</p> <span style="font-family: Arial; color: black; font-size: 10pt;">Finished adjusting the shift cables,she shifts smooth again and it’s pretty simple to do.</span></p> <span style="font-family: Arial; color: black; font-size: 10pt;">Before you get started make sure the cables under the...

<span style="font-family: Arial; color: black; font-size: 10pt;">The entire sticky shift problem is most likely due to cable stretch. My 4wd lever was sticking a bit I adjusted the cable smooth as silk. I will let you know for sure as I'm going to adjust my shift cables tomorrow. I adjusted my...

found the switch thanks guys. My problem was the plug was disconnected. Love those easy fixes</p>