Search results

I've been meaning to order some because mine does that also. Part# K7591-17490 Dave

My kids would hit the windshield when I would let up on the throttle before I installed it. Now they only hit it when I mash the brakes:yum: Dave

I've put about 500 or so hours on it with coast valve. Dave

It's just a plug. You take the old one out and replace it with the new one...5 minute job. Mine has been in since February or March of 2017. It's well worth it if you're tired of getting launched into the windshield. Dave

That's the one I got for my X900. So far, so good. Dave

Back in my younger years of playing with 4x4 trucks, I used to size my winch to 2x +/- my vehicle's gvw. That being said....if you had a 4000 or 5000 on your RTV and can't get it out, you have bigger problems. I would also suggest wire rope vs. synthetic if you are going to be using it in an...

Yes, UDT is the stuff to use. Dave

Just had same problem with my 2014 x900. Kubota's fix is to use a piece of hose with a plug on the end. I just used a piece of heater hose I had kicking around and put a bolt in it.

I have a SnowDogg on my 2014 X900 and this is my first winter using it and I still haven't decided how I feel about it. My only real bitch is that it leaves a small row of snow boogers where it pivots in the middle. I'm not sure if it's the nature of the beast with a V or not, but it still beats...

Thanks for your response. I do have the HAD front springs on it. I just went ahead and raised it one set of holes on the plow bracket and one more notch on springs. I'll toss the plow on after I get barn chores done to see how it sits. Dave

For those of you that are running a v plow, what setting do you have your front springs at? Currently mine are in the middle but thinking about turning them up to get a little more height on the main plow frame. I have a few more inches to go before I max out the height on the rtv mounted...

Trying to keep warm.

Thanks Doc! For some reason my phone is flipping pictures, even on Facebook when I post. Must be a "feature". Dave

Just got done plowing snow with my X900 for the first time and I have to say I'm impressed with this little buggy. Dave

I love it when a plan comes together! Dave

I replaced both lower ball joints on my 2014 X900 at 300 or so hours and like 700 miles. I need to do all the bushings on my machine because the A arms slide back and forth a good 3/16". I'm a firm believer that tubes of grease are cheaper than pins and bushings so I'm not shy with the grease...

I guess this is a prime example of the saying "Just because someone does something for a living, doesn't mean they are good at it" I hope they get it right. Dave

Attached is the paperwork from the HD shocks in case you didn't check out the post i linked to. Bushings Upper bushing K7591-18242 Lower bushing K7591-17650 4 of each are needed. Dave

This thread has pics of the box and the instruction sheet and also I listed the bushing part numbers. http://www.nettractortalk.com/forums/showthread.php?p=123414#post123414 Dave

I just found a new set on eBay. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F382272554508 I would also make sure you get new bushings for them and not use the old ones. Dave Dave