Search results

I was just thinking that maybe the windshield fits into a slot on the gasket and then the gasket gets pressed on the frame to make the deal and possibly I stuffed the wire too far and actually created a gap to the outside? Dave

It's seam sealer on a panel seam not silicone. It's also a brand new machine. I didn't have any water leaking before running the wires up, but I'll look at it closer and when I recover from my night last night, LOL.

Yeah, I was a little surprised to say the least. I think I'll use these little things that stick on and you use a zip tie to secure the wire. Dave

Just got in THE RTV and apparently the spot I ran the wires up along windshield gasket wasn't a good idea. Water leaked in so need to come up with plan B. Dave

Still living in the 90's. 🤣🤣 Dave

Let's see if my video works. Dave

I decided to finish up the dome light switch and delay project today. It's setup to turn light on when door is opened and slowly dim out after 5 seconds after door is closed. It also will turn light on when you shut ignition off and shut off immediately if door closes when ignition is on. I also...

Mine is a '22, just got it in September. The orange is just a reflection and it's actually painted black. I just pulled the wire out a little so you could see where it was running, but yes it goes up and into the headliner. Dave

Not the greatest pictures especially since I'm using a brown wire. It's tucked between the post and windshield gasket. Dave

Looks good! It's always nice to have someone play guinea pig before I commit. Dave

Yeah, I spent a little bit today trying to figure an easy way to run the wire up from the cupholders and didn't come up with a solution that isn't a little janky. The one thing I could come up with is to run the wire from the cupholder area and tuck it in under the rubber windshield gasket along...

The suspense is killing me. 😉

Looks like next to cupholders might be an easy option but need to figure out wire routing. Dave

Do you have a picture of the switch? I'm always looking for options before I commit to what I already bought. Dave

I had no clue these existed either until I Googled "dome light delay module" and this one seemed to be perfect because you can set the parameters the way you want. I was thinking about mounting the switches up near the cupholders but haven't looked to see how much space olis behind the...

It's a cute little thing, LOL. I was going to do the dome light project over the weekend but still can't decide if I want to mount the jamb switches in the same location as ZMAN put his or if I can come up with a different spot. I configured the delay for 5 seconds and a 10 minute timeout if...

I'm taking this one step further and adding a delay module so the light will stay on for a few seconds (adjustable) after shutting the door door. The module is programmable for amount of delay and also will shut light off after a few minutes if door is left open...

I was just looking on Amazon and there's a few listings for similar looking ones and they claim to be adjustable length.

More info would definitely be greatly appreciated.

I've been thinking about doing this with my new X1100.