Search results

This might work - looks like this male would fit in the female you show in the jpeg. It is Kubota part number 1C010-65830. https://shop.equipmentshare.com/products/kubota-coupler-assembly-1c010-65830 Good luck

Thanks Homestead342 for the information. As soon as my extended warranty runs out I may order one.

I wanted to drop the RPM's at idle when I first got my X900 back in 2014 and I was told that the idle is not adjustable. Since then I have not inquired or explored more. On my new X1100C they have a hand throttle so the "idle" speed can be increased for cold weather start-ups. Let us know if...

I had coolant leaks on my 2014 X900 after a year and found the clamps needed tightening. Now - with 600 hours on my 2022 X1100C I have had the same problem. There were two major leaks: one at one of the connections of three hoses at a metal junction below the driver's seat and the other was...

The side rails are connected to square stock that fits in the square channels at the corners of the cargo box. Pop the covers off and then slide in the square tubing, and cut to the length you want. Most hardware departments carry the square stock in 4 foot lengths. I purchased the smaller...

A bit of snow coming in tonight so I put the plow on and set up the strobe light. I've had the strobe light since 2018. The magnetic base is super strong and locks nicely on the rack I made. There are about 6 different flashing patterns that are easily switched with the 2nd switch on the...

I use Sta-Bil Diesel additive when I take delivery which I do in November so I get the winter blend from the provider. So far no problems and my 275 gallon tank is in a shed outdoors.

Hello bczoom, this is very generous of you! Thank you for the offer. I, however, find the pipe method to be working really well and don't anticipate trying a rubber edge. I have almost 2 miles of driveway/road that I keep plowed and I think a rubber edge would wear out really fast. I did...

I made a mount that is attached to the right rear position of the X1100C wired for a light. On this metal mount I position a magnetic multifunction LED strobe light. It is powered via its own power cord that I plug into the 12v tap. It has worked out really well and the cord is routed around...

I miss stated the size of PVC pipe I used. I just looked at it and it is 2 inch. As you can see from the pictures, I cut a slot of the pipe and it sits in the blade. I have not yet installed it for this winter (I use it primarily in the spring when the snow is melting and the road gets soft...

I love the Boss V Plow but have not attached a pipe to the cutting edge. I do place a 1.5 inch PVC pipe to the cutting edge of my rear blade on my B7800 and it is perfect for soft road clearing up when the dirt can easily be turned up. Not sure how it would work on the V plow. Good luck...

I will be interested to learn what you find. Please keep us informed. How old is your machine??

This is also true with the reed switch. The door does not need to latch to turn the light off.

Even though my mechanical spring switch has worked well, I have found it even more difficult to close the driver's door with the spring resistance adding to the tight cab problem! If I didn't get the door completely closed the light would stay on. The time out feature has helped, but it still...

When I was shopping for a new RTV I had planned on purchasing the K-connect system, but one dealer I visited said they do not sell or install the K-connect system as they have been "troublesome". When I pressed for some details they just said it is difficult to install and maintain alignment...

I treated mine with Wood Wax right away. So far it seems to work. It is only two years old, but has been worked every day. I do blow air into the holes from time to time to make sure all is clear.

The Boss V-Plow works extremely well. The hydraulics are quick and powerful. As Bigorangething said “ it can stack snow 6 feet high” and in my 8 years of plowing my 2 miles of dirt roads I’ve never not been able to plow. With a set of chains on the rear wheels the Kubota is a bulldozer.

I purchased a stall mat from tractor supply and that has been great. Tools don’t roll around as much, tossing wood in doesn’t dent the floor, and it is quieter. I’ve had this in my 2014 and 2021 machines. Cheaper and easy to remove for cleaning.

Depends, but average 2,000 miles a year. It is a work vehicle. Pretty much just plowing during the winter, perhaps 300 miles doing that and the rest of the year it will be 5-12 miles per day.

Good Work! Mine broke under warranty and Kubota finally agreed to repair it on their dime - welded the transmission and then welded the muffler to the exhaust manifold. 10,000 miles later is was still as good as new. Glad you were able to make a bracket.