Search results

I have what they call an 2007 that I purchased in 2008. It does NOT have the stoppers but does have the holes in the A-frame for mounting protectors. A friend of mine has a900 that he purchased from another dealer at the same time but he jhas the tabs welded to his A-frame with no holes for...

I would be concerned that one of the battery connections is corroded. That can be either positive of negative and expecially where the ground attaches to the Rhino. I have an old 830 Case that is very sensitive to corrosion. Jerry</p>

Tommy Found this unit on a used UTV lot - didn't know if this would work on HEADLANDS LOL</p>

Tommy If I PLEASED my wife that way I probably wouldn't see her for about three or four days - or until the swelling went down and I could see again!!!!!!!!!!!!</p>

I have never had my 900 in that type of situation, but spent a fewdays in Canyon Lands National Park in Utah. You can go in the park with a 4X4 or walk. We went in with a Ford 150 4X4 and sometimes we wished we had walked in. It is one of our National Parks that few people have seen or even...

</p> I heard that onfoot had to be trained at the RENT-A-Camel. They took his camel down to the water hole - as he was drinking the guide walked up behind the male camel and reached between his back legs and slammed two bricks together over his male appendeges This caused the camel to take a...

The package that my ends came in show 1/4" nipple 72N4-4F. The Kubota part no. 75536-66220 (Made in USA). I use my hydraulics for a small light steel bender, but I use the control lever to actuate the ram so that I don't leave the hydraulics in the run position. I do plan on using the hydraulics...

I'm going to take mine. Wife said she will write a check and put it in casket. Probably your sister will do that for you. LMAO</p>

Barrack Obama visited Louisiana and returned to D.C. As he stepped off the helicopter, he had a piglet under each arm. An aide asked what he was doing with two pigs. He stated that he had got the pigs for Nancy Pelosi and Hilary Clinton. The aide responded with "good trade sir". </p>

I've seen the type that Kubota Kanook has - they are available at Wal-Mart. They also have a GPS unit with a built in camera (wireless) - think they are about $250.</p>

I have a Stebel air horn on my cycles, tractor, and will be putting one on the 900. They are 139db and can be heard for a long ways. They are on e-bay.</p>

Was at the local Wally-world this AM - they have no .223's or 22's. They have a call list for shells!!!!!!!!!!!!!!!! Jerry</p>

</p> I just attended a political meeting this am at our local college. One of the questions related to GUNS - not handguns or carry weapons - just guns. There was a large group of 18-24 yr old college kids that were against having guns. They made it very apparent that in the future we may have...

My 900 runs at 26mph (GPS), but is very sensetive to load or hills. I have a couple of times had the parking brake at the first click and could not figure out the loss of HP. I also carry about 750 lbs of sparayer and water and this effects the speed. It seems that the tourge at full throttle is...

Merry Christmas to all. Will be leaving this pm and hoping to get our flight to much warmer country. I think we are to get above "0"today. Jerry</p>

I have a contract to do surveys of roads, ditches, makers, etc. that requires me to travel a lot of miles on roads, use the computer and sometimes a camera, so I set the throttle for about 10 mph. I can then travel without going faster or slower and not have to pqy attention to what my foot is...

I agree on the fluids and filters, but I have trained myself to pull the shift out of gear before I come to a complete stop. This procedure seems to allow the shift before the pump builds up pressure - I also use the COAST STOP and don't plan to modify the transmission. Jerry</p>

Most farm stores/tractor dealershave various types of inline flow restrictors. I use one that you actually drill a hole to fit your needs. Bought mine at atractor dealer. They canusually advise you on what you need. jerry </p>

</p> Two guns I taped the plugin which also included the wiring. Since the BURN cut a slot from the bulb location to the bottom of the plastic lense, I also taped that area. Taping this area will not allow the plug to vibrate loose and move. I was surprised by how easy it is to unplug the...

I had the same problem - melted thru and down. I repaired it by using (You guessed it) duct tape. I also covered the other lamp so it cannot come loose with the same!!!!!!! jerry</p>