Search results

Your hst servo speed control lever could be out of adjustment. Also

You need specialized equipment flow meters etc. Then you need the specifications to compare to also. The most economical solution would be to change the filters to oem and put sudt2 oil in the transmission. You should confirm that your engine is running 3600 to 3800 rpm also. Things you...

Pressure is only part of the problem. You must also have flow rate.

Out this morning and oil all over under the x1100c. Took out the seat and mooved the fuse box to find the dome shaped plug on the unused port on the tank was rotted and cracked. Made a new one out of a hose a bolt and two clamps. Back to work

Versatile manufacturing. Large 4wd articulating tractor.

The worksite tires should wear fine on concrete.

I just learned something.

Anyone here run versatile tractors?

The engine should never die. The transmission may stall and no forward movement but engine should run on and on. I would suggest that if your fuel tank isn't full that you are running it out of fuel. Or a rag or something in the tank.

The gear part of the transmission is old school non syncromesh. More like an antique tractor. If there is and pressure on the gears they can be difficult to engage or disengage. The rtv must be stopped and the hydraulic pressure removed for the easiest gear changes. There is a dump valve...

I put 26x11x12 tires on my x1100c without any issues. The increased diameter sped things up just enough and the ride is better. On the stock steel rims

Correct. That pump has nothing to do with the transmission. Apparently it is dead heading and killing the engine? Since it idles and then suddenly dies i suspect that you are actuating the blade?

The rtv 1100 doesn't have a fan. But the water pump belt is adjusted with the alternator i think.

You are air locked. Dont run it that way. The new models have several air bleeds because of this. Probably should drain and add back very slowly until you get the same amount back in.

If yours has the rear axles with the cross shafts grease them regularly and get a coast valve or adjust the bypass for soft stops.

Also keep a close eye on the engine cooling system. Never let it overheat or the head cracks. Usually just keep the crap blown out of the radiator and frequently check the expansion tank. Run it hard they like to run at 3800 rpm all the time for many many thousands of hours .

On the rtv for long service life always use kubota sudtII AND none other brand. Use oem filters. Change the hst oil at least every second year unless you reach the service intervals in hours first. Don't wait for the hours. And if you must clean the engine transmission don't use water. Use...

Please remind me what the manual says about the relief valve and spring? Does the manual give a length spec for the spring? The redundant question.. has the oil been changed and replaced with sudt and are the filters oem and in the correct position.

Maybe if you know the description you could have a hose made and take it with you? Jic ends? Or what? And length?

Look at the shifter assembly on the trans. One lever moves the shifter left and right the other forward or backwards. Notice when you use the shift lever on the dash that the lever will move the cables differently. Put the transmission and confirm neutral then confirm the shift lever is in a...