Search results

I'll pile on and say to go with East Penn. That's about all I buy and they last a long, long time.

Please post back with the resolution or if the battery cable fix/bypass didn't work.

I've had this situation several times on my tractor. EVERY time, it was bad battery cables. They rot on the inside and the damage isn't visible. If the way you jumped it (I'm assuming from the battery to the starter or using a jumper box on the starter itself also leads me to believe it's bad...

Are you talking directly with the service department? If so, I'd redirect your efforts and conversations with the sales department/manager and let them know of your displeasure. Advise them that if this is how you're treated based on your purchase history with them that you'll be done doing...

He did note his location in his post: located 07440 NJ

Price wise, I'd say you're pretty close to being market value but it's a matter of "what's it worth to you to sell". I'd check other machines like yours on places like: https://www.machinerytrader.com/ https://www.tractorhouse.com/listings/for-sale/kubota/rtvx1120/farm-equipment Myself, I have...

Seems like a very reasonable price and it comes with a free coat of dust/dirt! :)

Welcome to the forum!

When you say "out of plumb", are you talking about the side rail sticking out in this picture? https://www.nettractortalk.com/forums/attachments/img_20241202_093251875-jpg.15796/ What is that tab on the top of the tailgate? That seems to be an integral part, like it's supposed to be grabbing...

You could use a cross reference and buy one under a different mfgr. https://www.sparkplug-crossreference.com/convert/NGK_PN/1664 E.g. Here's one for $8 https://www.amazon.com/dp/B0B6B87RWT

@JPS Just throwing this out there since you're close and may have a use. I have a 48" DR Grader I want to sell. It's similar to what's pictured below. The linear actuator isn't working and would need replaced (unless you converted it to a manual lift). I "think" a new actuator is about $150...

You may need a minor clutch adjustment. How far can you push in the clutch pedal before you start to feel resistance? Can't speak specifically for your tractor but if it's more than about 1/2", you may have too much play. When that happens, when you fully depress the clutch pedal, the clutch...

I live kind of close. Thinking of maybe selling my rtv. If your budget only allows for a used machine, let me know.

I'm on my phone and only use 1 finger so this will be short for now. I'll elaborate later. The rtv will do all you ask. I'm not a fan of equipment with cabs in the woods. Too many branches that want to break the glass. As I recall, the bobcat has twice the power of the rtv. The rtv may...

Does the noise sound like gears trying to mesh? I don't have your tractor but do occasionally get a grinding. To mitigate: Reduce engine speed to idle. Make sure the clutch is fully depressed. Maybe wait a few seconds. Engage the PTO. The grinding should be gone or almost gone.

Damn that thing is pretty. The reach looks incredible!

Can't speak for your year/model, but on mine, it's a square channel that's on the left side frame (under the bed). There's a short cable on it. Just slide it off the frame and over the hyd cylinder.

Welcome to the forum. We're going to need more info. Where was the oil coming from? What does it smell like (e.g. does it smell like diesel)? How much oil came out? If you pull the dipstick, is there still oil in there? Any indications of oil spray or leak from the top side of the engine...

According to tractordata, for 9a86417 it looks like it's a 1969 https://www.tractordata.com/farm-tractors/000/7/4/743-massey-ferguson-135.html 135 Serial Numbers 1964641000001 1965641001909 1966641014871 19679A10001 19689A39836 19699A63158 19709A87325 19719A107519...

Try backing off the go-pedal to about 1/2 way. Mashing the pedal to the floor isn't the right approach on hills.