Search results

Can you "safely" just disengage 4WD using the 2WD/4WD controls? What about your issue with 2WD in reverse? Think it's related? If you keep it out of 4WD, are you still at risk with the reverse issue?

That doesn't sound good. :( I'd start with: Using your loader bucket or jacks, get the front wheels off the ground. Put the tractor in 4WD Turn off the tractor. Try spinning the wheels. Listen for noises starting from the front transaxle back through the drive shaft and its components all the...

Welcome to the forum. Wish it was under better circumstances. :( Please elaborate on "locks up". The tractor won't move?

I'll pile on and say to go with East Penn. That's about all I buy and they last a long, long time.

Please post back with the resolution or if the battery cable fix/bypass didn't work.

I've had this situation several times on my tractor. EVERY time, it was bad battery cables. They rot on the inside and the damage isn't visible. If the way you jumped it (I'm assuming from the battery to the starter or using a jumper box on the starter itself also leads me to believe it's bad...

Are you talking directly with the service department? If so, I'd redirect your efforts and conversations with the sales department/manager and let them know of your displeasure. Advise them that if this is how you're treated based on your purchase history with them that you'll be done doing...

He did note his location in his post: located 07440 NJ

Price wise, I'd say you're pretty close to being market value but it's a matter of "what's it worth to you to sell". I'd check other machines like yours on places like: https://www.machinerytrader.com/ https://www.tractorhouse.com/listings/for-sale/kubota/rtvx1120/farm-equipment Myself, I have...

Seems like a very reasonable price and it comes with a free coat of dust/dirt! :)

Welcome to the forum!

When you say "out of plumb", are you talking about the side rail sticking out in this picture? https://www.nettractortalk.com/forums/attachments/img_20241202_093251875-jpg.15796/ What is that tab on the top of the tailgate? That seems to be an integral part, like it's supposed to be grabbing...

You could use a cross reference and buy one under a different mfgr. https://www.sparkplug-crossreference.com/convert/NGK_PN/1664 E.g. Here's one for $8 https://www.amazon.com/dp/B0B6B87RWT

@JPS Just throwing this out there since you're close and may have a use. I have a 48" DR Grader I want to sell. It's similar to what's pictured below. The linear actuator isn't working and would need replaced (unless you converted it to a manual lift). I "think" a new actuator is about $150...

You may need a minor clutch adjustment. How far can you push in the clutch pedal before you start to feel resistance? Can't speak specifically for your tractor but if it's more than about 1/2", you may have too much play. When that happens, when you fully depress the clutch pedal, the clutch...

I live kind of close. Thinking of maybe selling my rtv. If your budget only allows for a used machine, let me know.

I'm on my phone and only use 1 finger so this will be short for now. I'll elaborate later. The rtv will do all you ask. I'm not a fan of equipment with cabs in the woods. Too many branches that want to break the glass. As I recall, the bobcat has twice the power of the rtv. The rtv may...

Does the noise sound like gears trying to mesh? I don't have your tractor but do occasionally get a grinding. To mitigate: Reduce engine speed to idle. Make sure the clutch is fully depressed. Maybe wait a few seconds. Engage the PTO. The grinding should be gone or almost gone.

Damn that thing is pretty. The reach looks incredible!

Can't speak for your year/model, but on mine, it's a square channel that's on the left side frame (under the bed). There's a short cable on it. Just slide it off the frame and over the hyd cylinder.