Search results

if you look at mine it does not get into that angle brace its just short of it.Even in you got into it by 1/8 of an inch it would not effect anything.Im a month in now with some nasty conditions and have had no issues and the added clearance is great.

Here is one thing in life ive learned over the past 40 years or so. When adding anything 12 volts to anything that draws more than 5 amps always add a relar period..99 percent of switches of any type can only handle a small amount of amperage before they melt down like a liberal during Trumps...

:blob_blue::respect::thankyou2::dancing:Happy Trump Day all!

I changed mine out also but went a different route.I picked up some used pads from a real trick and cut off the posts and re welded half inch grade 8 bolts on them for the posts so they dont bend.Either way is fine but I generally look for the easier least expensive way.I used to keep mine...

Ill hold my comments to myu self on this one as I could upset some people lol.

the one on the valve cover is for filling.The other may be a screw on type dipstick for checking oil level?

Make sure they are both for oil.One may be for hydrolyc fluid.I cant remember off hand what the oil amount for the 900 is but the tranny is 2.2 gallons but if memory serves me the oil is just over 3 quarts.Kubota generally has specs listed on their web page on fluid levels.Remember when changing...

you all can have some of my snow.Were under another winter storm warning with 8 to 12 inches expected and 40 mph winds.Ive already moved a ton of snow this year and im tired of it already,I already had to pull the big tractor out to move snow piles and plow the wet heavy 14 inches we had a few...

Im not sure on the 1120 0r the 1140 models but the regular rtv 900 in low gear I have had no issues hauling heavy loads up steep hills even pulling a trailer.The only issue you may run into is loosing traction.As long as you can hold traction it has no issues loosing power going up steep...

its a shame what laxk of caring and maintanance does to a machine.Mine is a 2004 and sure it has a bew bumps and bruises on it but it still looks very nice.But I take the time to clean it...

With the bonus of traction of the tracks there is the dis advantage of the mud flying.Only way to keep the mud down is a low speed.I drove dozers for many years and it was the same shing.Slow speed means no mud flying around.High speed means mud all over the place.If it gets muddy and you want...

I tried to get the best angles for this to show how it was done and how it worked.1st image shows how much I ground out the frame and where I ground it.I can sure go more in the future but its to damn cold out there for me.2nd image shows how it used to lift or how high before gringing and the...

Thats the rear I need the front but thanks anyways

Bob,Ill take a few pics for you tomorrow and post them. I hope this helps ya out as It is a PITA with the lack of clearance.Ive struggled for 8 years with mine with this issue but i know it will be a huge help.

Here is a tip for anyone who has a curtis plow from Kubota on their RTV .Most who own one will know you have a limited amount of lift on the plow and are lucky to have 4 to 6 inches ground clearance while raised.Today I looked over mine to see what I could do to get more lift.The way its...

I also cracked the tab that holds the front orange shroud on the machine but I can fix that or live with that as I know that piece is in the thousands to replace.

Hi All,I had a boo boo last week while plowing.I hit a snow covered log and it ran up behind the wheel and hit the black fender skirt on the passenger side of the machine and cracked it to hell.Does anyone know of anyone or have a part out machine that you would be willing to sell me the fender...

UPDATE:::::I took the big heater and threw it on the under side of the machine.I also took the heat gun and heated up the lionkage section where the grease fittings are and warmed up the grease and pumped new grease in it till it spilled over on both sides.I noticed some water or condensation...

I agree whit the above statements.My mount is straight and it does look like yours is bent. Its been ages since I purchased mine and ill look to see if I have the instructions filed away but i wouldnt hold my breath on finding them

Ya I tried to fill it with WD 40 last night but may have to add more and force it through with the air compressor.Its in the garage now and still stuck to the floor.Ill grab the torpedo heater and point it under the machine to melt things and see what happens.Hasnt been much above 15 here and...